ggplot2: Box Plots

[This article was first published on Rsquared Academy Blog - Explore Discover Learn, and kindly contributed to R-bloggers]. (You can report issue about the content on this page here)
Want to share your content on R-bloggers? click here if you have a blog, or here if you don't.

Introduction

This is the 9th post in the series Elegant Data Visualization with ggplot2. In the previous post, we learnt how to build bar charts. In this post, we will learn to:

  • build box plots
  • modify box
    • color
    • fill
    • alpha
    • line size
    • line type
  • modify outlier
    • color
    • shape
    • size
    • alpha

The box plot is a standardized way of displaying the distribution of data. It is useful for detecting outliers and for comparing distributions and shows the shape, central tendancy and variability of the data.


Structure

  • the body of the boxplot consists of a “box” (hence, the name), which goes from the first quartile (Q1) to the third quartile (Q3)
  • within the box, a vertical line is drawn at the Q2, the median of the data set
  • two horizontal lines, called whiskers, extend from the front and back of the box
  • the front whisker goes from Q1 to the smallest non-outlier in the data set, and the back whisker goes from Q3 to the largest non-outlier
  • if the data set includes one or more outliers, they are plotted separately as points on the chart


Libraries, Code & Data

We will use the following libraries in this post:

All the data sets used in this post can be found here and code can be downloaded from here.


Data

We are going to use two different data sets in this post. Both the data sets have the same data but are in different formats.

daily_returns <- readr::read_csv('https://raw.githubusercontent.com/rsquaredacademy/datasets/master/tickers.csv')
daily_returns
## # A tibble: 250 x 5
##       AAPL   AMZN      FB    GOOG    MSFT
##      <dbl>  <dbl>   <dbl>   <dbl>   <dbl>
##  1  1.38    24.2   2.12    22.4    1.12  
##  2  2.83     3.25 -0.860    5.99   0.767 
##  3 -0.0394   9.91  1.45     6.75   0.973 
##  4  0.108    3.76 -0.770  -10.7   -0.285 
##  5  1.64    19.8   4.75     8.66   0.501 
##  6  0.0689   5.33 -0.300   -0.930  0.256 
##  7 -0.561   -5.21 -0.630   -7.28  -0.708 
##  8  0.551    0.25 -0.460    0.690  0.128 
##  9 -0.217  -13.6   0.0300   6.56   0.0786
## 10 -0.108   -4.25  0.460    2.60   0.472 
## # ... with 240 more rows


Univariate Box Plot

If you are not comparing the distribution of continuous data, you can create box plot for a single variable. Unlike plot(), where we could just use 1 input, in ggplot2, we must specify a value for the X axis and it must be categorical data. Since we are not comparing distributions, we will use 1 as the value for the X axis and wrap it inside factor() to treat it as a categorical variable. In the below example, we examine the distribution of stock returns of Apple.

ggplot(daily_returns) +
  geom_boxplot(aes(x = factor(1), y = AAPL))


Data

For the rest of the post, we will use the below data set. Instead of 5 columns, we have two columns. One for the stock names and another for returns.

tidy_returns <- 
  read_csv('https://raw.githubusercontent.com/rsquaredacademy/datasets/master/tidy_tickers.csv',
  col_types = list(col_factor(levels = c('AAPL', 'AMZN', 'FB', 'GOOG', 'MSFT')), col_double()))
tidy_returns
## # A tibble: 1,254 x 2
##    stock returns
##    <fct>   <dbl>
##  1 AAPL   1.38  
##  2 AAPL   2.83  
##  3 AAPL  -0.0394
##  4 AAPL   0.108 
##  5 AAPL   1.64  
##  6 AAPL   0.0689
##  7 AAPL  -0.561 
##  8 AAPL   0.551 
##  9 AAPL  -0.217 
## 10 AAPL  -0.108 
## # ... with 1,244 more rows


Box Plot

With the above data, let us create a box plot where we compate the distribution of stock returns of different companies. We map X axis to the column with stock names and Y axis to the column with stock returns. Note that, the column names are wrapped inside aes().

ggplot(tidy_returns) +
  geom_boxplot(aes(x = stock, y = returns))


To create a horizontal bar plot, we can use coord_flip() which will flip the coordinate axes.

Horizontal Box Plot

ggplot(tidy_returns) +
  geom_boxplot(aes(x = stock, y = returns)) +
  coord_flip()


Notch

Notches are used to compare medians. You can use the notch argument and set it to TRUE.

ggplot(tidy_returns) +
  geom_boxplot(aes(x = stock, y = returns),
    notch = TRUE) 


Jitter

Just for comparison, let us plot the returns as points on top of the box plot using geom_jitter(). We modify the color of the points using the color argument and the spread using the width argument.

ggplot(tidy_returns, aes(x = stock, y = returns)) +
  geom_boxplot() +
  geom_jitter(width = 0.2, color = 'blue')


Outliers

To highlight extreme observations, we can modify the appearance of outliers using the following:

  • color
  • shape
  • size
  • alpha


To modify the color of the outliers, use the outlier.color argument. The color can be specified either using its name or the associated hex code.

ggplot(tidy_returns) +
  geom_boxplot(aes(x = stock, y = returns), outlier.color = 'red')


The shape of the outlier can be modified using the outlier.shape argument. It can take values between 0 and 25.

ggplot(tidy_returns) +
  geom_boxplot(aes(x = stock, y = returns), outlier.shape = 23) 


The size of the outlier can be modified using the outlier.size argument. It can take any value greater than 0.

ggplot(tidy_returns) +
  geom_boxplot(aes(x = stock, y = returns), outlier.size = 3) 


You can play around with the transparency of the outlier using the outlier.alpha argument. It can take values between 0 and 1.

ggplot(tidy_returns) +
  geom_boxplot(aes(x = stock, y = returns), outlier.color = 'blue', outlier.alpha = 0.3) 


Box Aesthetics

The appearance of the box can be controlled using the following:

  • color
  • fill
  • alpha
  • line type
  • line width


Specify Values

The background color of the box can be modified using the fill argument. The color can be specified either using its name or the associated hex code.

ggplot(tidy_returns) +
  geom_boxplot(aes(x = stock, y = returns), fill = c('blue', 'red', 'green', 'yellow', 'brown')) 


To modify the transparency of the background color, use the alpha argument. It can take any value between 0 and 1.

ggplot(tidy_returns) +
  geom_boxplot(aes(x = stock, y = returns), fill = 'blue', alpha = 0.3) 


The color of the border can be modified using the color argument. The color can be specified either using its name or the associated hex code.

ggplot(tidy_returns) +
  geom_boxplot(aes(x = stock, y = returns), color = c('blue', 'red', 'green', 'yellow', 'brown')) 


The width of the border can be changed using the size argument. It can take any value greater than 0.

ggplot(tidy_returns) +
  geom_boxplot(aes(x = stock, y = returns), size = 1.5) 


To change the line type of the border, use the linetype argument. It can take any value between 0 and 6.

ggplot(tidy_returns) +
  geom_boxplot(aes(x = stock, y = returns), linetype = 2) 


Map Variables

Instead of specifying values, we can map fill and color to variables as well. In the below example, we map fill to the variable stock. It assigns different colors to the different stocks.

ggplot(tidy_returns) +
  geom_boxplot(aes(x = stock, y = returns, fill = stock)) 


Let us map color to the variable stock. It will assign different colors to the box borders.

ggplot(tidy_returns) +
  geom_boxplot(aes(x = stock, y = returns, color = stock)) 


Summary

In this post, we learnt to:

  • build box plots
  • modify outlier color, shape, size etc.
  • modify box color
  • modify box line color, size and line type


Up Next..

In the next post, we will learn to build histograms.


To leave a comment for the author, please follow the link and comment on their blog: Rsquared Academy Blog - Explore Discover Learn.

R-bloggers.com offers daily e-mail updates about R news and tutorials about learning R and many other topics. Click here if you're looking to post or find an R/data-science job.
Want to share your content on R-bloggers? click here if you have a blog, or here if you don't.

Never miss an update!
Subscribe to R-bloggers to receive
e-mails with the latest R posts.
(You will not see this message again.)

Click here to close (This popup will not appear again)