Survival analysis corresponds to a set of statistical approaches used to investigate the time it takes for an event of interest to occur.
Survival analysis is used in a variety of field such as:
 Cancer studies for patients survival time analyses,
 Sociology for “eventhistory analysis”,
 and in engineering for “failuretime analysis”.
In cancer studies, typical research questions are like:
 What is the impact of certain clinical characteristics on patient’s survival
 What is the probability that an individual survives 3 years?
 Are there differences in survival between groups of patients?
Objectives
The aim of this chapter is to describe the basic concepts of survival analysis. In cancer studies, most of survival analyses use the following methods:
 KaplanMeier plots to visualize survival curves
 Logrank test to compare the survival curves of two or more groups
 Cox proportional hazards regression to describe the effect of variables on survival. The Cox model is discussed in the next chapter: Cox proportional hazards model.
Here, we’ll start by explaining the essential concepts of survival analysis, including:
 how to generate and interpret survival curves,
 and how to quantify and test survival differences between two or more groups of patients.
Then, we’ll continue by describing multivariate analysis using Cox proportional hazards model.
Basic concepts
Here, we start by defining fundamental terms of survival analysis including:
 Survival time and event
 Censoring
 Survival function and hazard function
Survival time and type of events in cancer studies
There are different types of events, including:
 Relapse
 Progression
 Death
The time from ‘response to treatment’ (complete remission) to the occurrence of the event of interest is commonly called survival time (or time to event).
The two most important measures in cancer studies include: i) the time to death; and ii) the relapsefree survival time, which corresponds to the time between response to treatment and recurrence of the disease. It’s also known as diseasefree survival time and eventfree survival time.
Censoring
As mentioned above, survival analysis focuses on the expected duration of time until occurrence of an event of interest (relapse or death). However, the event may not be observed for some individuals within the study time period, producing the socalled censored observations.
Censoring may arise in the following ways:
 a patient has not (yet) experienced the event of interest, such as relapse or death, within the study time period;
 a patient is lost to followup during the study period;
 a patient experiences a different event that makes further followup impossible.
This type of censoring, named right censoring, is handled in survival analysis.
Survival and hazard functions
Two related probabilities are used to describe survival data: the survival probability and the hazard probability.
The survival probability, also known as the survivor function \(S(t)\), is the probability that an individual survives from the time origin (e.g. diagnosis of cancer) to a specified future time t.
The hazard, denoted by \(h(t)\), is the probability that an individual who is under observation at a time t has an event at that time.
Note that, in contrast to the survivor function, which focuses on not having an event, the hazard function focuses on the event occurring.
KaplanMeier survival estimate
The KaplanMeier (KM) method is a nonparametric method used to estimate the survival probability from observed survival times (Kaplan and Meier, 1958).
The survival probability at time \(t_i\), \(S(t_i)\), is calculated as follow:
\[S(t_i) = S(t_{i1})(1\frac{d_i}{n_i})\]
Where,
 \(S(t_{i1})\) = the probability of being alive at \(t_{i1}\)
 \(n_i\) = the number of patients alive just before \(t_i\)
 \(d_i\) = the number of events at \(t_i\)
 \(t_0\) = 0, \(S(0)\) = 1
The estimated probability (\(S(t)\)) is a step function that changes value only at the time of each event. It’s also possible to compute confidence intervals for the survival probability.
The KM survival curve, a plot of the KM survival probability against time, provides a useful summary of the data that can be used to estimate measures such as median survival time.
Survival analysis in R
Install and load required R package
We’ll use two R packages:
 survival for computing survival analyses

survminer for summarizing and visualizing the results of survival analysis

Install the packages
install.packages(c("survival", "survminer"))
 Load the packages
library("survival")
library("survminer")
Example data sets
We’ll use the lung cancer data available in the survival package.
data("lung")
head(lung)
inst time status age sex ph.ecog ph.karno pat.karno meal.cal wt.loss
1 3 306 2 74 1 1 90 100 1175 NA
2 3 455 2 68 1 0 90 90 1225 15
3 3 1010 1 56 1 0 90 90 NA 15
4 5 210 2 57 1 1 90 60 1150 11
5 1 883 2 60 1 0 100 90 NA 0
6 12 1022 1 74 1 1 50 80 513 0
 inst: Institution code
 time: Survival time in days
 status: censoring status 1=censored, 2=dead
 age: Age in years
 sex: Male=1 Female=2
 ph.ecog: ECOG performance score (0=good 5=dead)
 ph.karno: Karnofsky performance score (bad=0good=100) rated by physician
 pat.karno: Karnofsky performance score as rated by patient
 meal.cal: Calories consumed at meals
 wt.loss: Weight loss in last six months
Compute survival curves: survfit()
We want to compute the survival probability by sex.
The function survfit() [in survival package] can be used to compute kaplanMeier survival estimate. Its main arguments include:
 a survival object created using the function Surv()
 and the data set containing the variables.
To compute survival curves, type this:
fit < survfit(Surv(time, status) ~ sex, data = lung)
print(fit)
Call: survfit(formula = Surv(time, status) ~ sex, data = lung)
n events median 0.95LCL 0.95UCL
sex=1 138 112 270 212 310
sex=2 90 53 426 348 550
By default, the function print() shows a short summary of the survival curves. It prints the number of observations, number of events, the median survival and the confidence limits for the median.
If you want to display a more complete summary of the survival curves, type this:
# Summary of survival curves
summary(fit)
# Access to the sort summary table
summary(fit)$table
Access to the value returned by survfit()
The function survfit() returns a list of variables, including the following components:
 n: total number of subjects in each curve.
 time: the time points on the curve.
 n.risk: the number of subjects at risk at time t
 n.event: the number of events that occurred at time t.
 n.censor: the number of censored subjects, who exit the risk set, without an event, at time t.
 lower,upper: lower and upper confidence limits for the curve, respectively.
 strata: indicates stratification of curve estimation. If strata is not NULL, there are multiple curves in the result. The levels of strata (a factor) are the labels for the curves.
The components can be accessed as follow:
d < data.frame(time = fit$time,
n.risk = fit$n.risk,
n.event = fit$n.event,
n.censor = fit$n.censor,
surv = fit$surv,
upper = fit$upper,
lower = fit$lower
)
head(d)
time n.risk n.event n.censor surv upper lower
1 11 138 3 0 0.9782609 1.0000000 0.9542301
2 12 135 1 0 0.9710145 0.9994124 0.9434235
3 13 134 2 0 0.9565217 0.9911586 0.9230952
4 15 132 1 0 0.9492754 0.9866017 0.9133612
5 26 131 1 0 0.9420290 0.9818365 0.9038355
6 30 130 1 0 0.9347826 0.9768989 0.8944820
Visualize survival curves
We’ll use the function ggsurvplot() [in Survminer R package] to produce the survival curves for the two groups of subjects.
It’s also possible to show:
 the 95% confidence limits of the survivor function using the argument conf.int = TRUE.
 the number and/or the percentage of individuals at risk by time using the option risk.table. Allowed values for risk.table include:
 TRUE or FALSE specifying whether to show or not the risk table. Default is FALSE.
 “absolute” or “percentage”: to show the absolute number and the percentage of subjects at risk by time, respectively. Use “abs_pct” to show both absolute number and percentage.
 the pvalue of the LogRank test comparing the groups using pval = TRUE.
 horizontal/vertical line at median survival using the argument surv.median.line. Allowed values include one of c(“none”, “hv”, “h”, “v”). v: vertical, h:horizontal.
# Change color, linetype by strata, risk.table color by strata
ggsurvplot(fit,
pval = TRUE, conf.int = TRUE,
risk.table = TRUE, # Add risk table
risk.table.col = "strata", # Change risk table color by groups
linetype = "strata", # Change line type by groups
surv.median.line = "hv", # Specify median survival
ggtheme = theme_bw(), # Change ggplot2 theme
palette = c("#E7B800", "#2E9FDF"))
The plot can be further customized using the following arguments:
 conf.int.style = “step” to change the style of confidence interval bands.
 xlab to change the x axis label.
 break.time.by = 200 break x axis in time intervals by 200.
 risk.table = “abs_pct”to show both absolute number and percentage of individuals at risk.
 risk.table.y.text.col = TRUE and risk.table.y.text = FALSE to provide bars instead of names in text annotations of the legend of risk table.
 ncensor.plot = TRUE to plot the number of censored subjects at time t. As suggested by Marcin Kosinski, This is a good additional feedback to survival curves, so that one could realize: how do survival curves look like, what is the number of risk set AND what is the cause that the risk set become smaller: is it caused by events or by censored events?
 legend.labs to change the legend labels.
ggsurvplot(
fit, # survfit object with calculated statistics.
pval = TRUE, # show pvalue of logrank test.
conf.int = TRUE, # show confidence intervals for
# point estimaes of survival curves.
conf.int.style = "step", # customize style of confidence intervals
xlab = "Time in days", # customize X axis label.
break.time.by = 200, # break X axis in time intervals by 200.
ggtheme = theme_light(), # customize plot and risk table with a theme.
risk.table = "abs_pct", # absolute number and percentage at risk.
risk.table.y.text.col = T,# colour risk table text annotations.
risk.table.y.text = FALSE,# show bars instead of names in text annotations
# in legend of risk table.
ncensor.plot = TRUE, # plot the number of censored subjects at time t
surv.median.line = "hv", # add the median survival pointer.
legend.labs =
c("Male", "Female"), # change legend labels.
palette =
c("#E7B800", "#2E9FDF") # custom color palettes.
)
The KaplanMeier plot can be interpreted as follow:
The horizontal axis (xaxis) represents time in days, and the vertical axis (yaxis) shows the probability of surviving or the proportion of people surviving. The lines represent survival curves of the two groups. A vertical drop in the curves indicates an event. The vertical tick mark on the curves means that a patient was censored at this time.
 At time zero, the survival probability is 1.0 (or 100% of the participants are alive).
 At time 250, the probability of survival is approximately 0.55 (or 55%) for sex=1 and 0.75 (or 75%) for sex=2.
 The median survival is approximately 270 days for sex=1 and 426 days for sex=2, suggesting a good survival for sex=2 compared to sex=1
The median survival times for each group can be obtained using the code below:
summary(fit)$table
records n.max n.start events *rmean *se(rmean) median 0.95LCL 0.95UCL
sex=1 138 138 138 112 325.0663 22.59845 270 212 310
sex=2 90 90 90 53 458.2757 33.78530 426 348 550
The median survival times for each group represent the time at which the survival probability, S(t), is 0.5.
The median survival time for sex=1 (Male group) is 270 days, as opposed to 426 days for sex=2 (Female). There appears to be a survival advantage for female with lung cancer compare to male. However, to evaluate whether this difference is statistically significant requires a formal statistical test, a subject that is discussed in the next sections.
Note that, the confidence limits are wide at the tail of the curves, making meaningful interpretations difficult. This can be explained by the fact that, in practice, there are usually patients who are lost to followup or alive at the end of followup. Thus, it may be sensible to shorten plots before the end of followup on the xaxis (Pocock et al, 2002).
The survival curves can be shorten using the argument xlim as follow:
ggsurvplot(fit,
conf.int = TRUE,
risk.table.col = "strata", # Change risk table color by groups
ggtheme = theme_bw(), # Change ggplot2 theme
palette = c("#E7B800", "#2E9FDF"),
xlim = c(0, 600))
Note that, three often used transformations can be specified using the argument fun:
 “log”: log transformation of the survivor function,
 “event”: plots cumulative events (f(y) = 1y). It’s also known as the cumulative incidence,
 “cumhaz” plots the cumulative hazard function (f(y) = log(y))
For example, to plot cumulative events, type this:
ggsurvplot(fit,
conf.int = TRUE,
risk.table.col = "strata", # Change risk table color by groups
ggtheme = theme_bw(), # Change ggplot2 theme
palette = c("#E7B800", "#2E9FDF"),
fun = "event")
The cummulative hazard is commonly used to estimate the hazard probability. It’s defined as \(H(t) = log(survival function) = log(S(t))\). The cumulative hazard (\(H(t)\)) can be interpreted as the cumulative force of mortality. In other words, it corresponds to the number of events that would be expected for each individual by time t if the event were a repeatable process.
To plot cumulative hazard, type this:
ggsurvplot(fit,
conf.int = TRUE,
risk.table.col = "strata", # Change risk table color by groups
ggtheme = theme_bw(), # Change ggplot2 theme
palette = c("#E7B800", "#2E9FDF"),
fun = "cumhaz")
KaplanMeier life table: summary of survival curves
As mentioned above, you can use the function summary() to have a complete summary of survival curves:
summary(fit)
It’s also possible to use the function surv_summary() [in survminer package] to get a summary of survival curves. Compared to the default summary() function, surv_summary() creates a data frame containing a nice summary from survfit results.
res.sum < surv_summary(fit)
head(res.sum)
time n.risk n.event n.censor surv std.err upper lower strata sex
1 11 138 3 0 0.9782609 0.01268978 1.0000000 0.9542301 sex=1 1
2 12 135 1 0 0.9710145 0.01470747 0.9994124 0.9434235 sex=1 1
3 13 134 2 0 0.9565217 0.01814885 0.9911586 0.9230952 sex=1 1
4 15 132 1 0 0.9492754 0.01967768 0.9866017 0.9133612 sex=1 1
5 26 131 1 0 0.9420290 0.02111708 0.9818365 0.9038355 sex=1 1
6 30 130 1 0 0.9347826 0.02248469 0.9768989 0.8944820 sex=1 1
The function surv_summary() returns a data frame with the following columns:
 time: the time points at which the curve has a step.
 n.risk: the number of subjects at risk at t.
 n.event: the number of events that occur at time t.
 n.censor: number of censored events.
 surv: estimate of survival probability.
 std.err: standard error of survival.
 upper: upper end of confidence interval
 lower: lower end of confidence interval
 strata: indicates stratification of curve estimation. The levels of strata (a factor) are the labels for the curves.
In a situation, where survival curves have been fitted with one or more variables, surv_summary object contains extra columns representing the variables. This makes it possible to facet the output of ggsurvplot by strata or by some combinations of factors.
surv_summary object has also an attribute named ‘table’ containing information about the survival curves, including medians of survival with confidence intervals, as well as, the total number of subjects and the number of event in each curve. To get access to the attribute ‘table’, type this:
attr(res.sum, "table")
LogRank test comparing survival curves: survdiff()
The logrank test is the most widely used method of comparing two or more survival curves. The null hypothesis is that there is no difference in survival between the two groups. The log rank test is a nonparametric test, which makes no assumptions about the survival distributions. Essentially, the log rank test compares the observed number of events in each group to what would be expected if the null hypothesis were true (i.e., if the survival curves were identical). The log rank statistic is approximately distributed as a chisquare test statistic.
The function survdiff() [in survival package] can be used to compute logrank test comparing two or more survival curves.
survdiff() can be used as follow:
surv_diff < survdiff(Surv(time, status) ~ sex, data = lung)
surv_diff
Call:
survdiff(formula = Surv(time, status) ~ sex, data = lung)
N Observed Expected (OE)^2/E (OE)^2/V
sex=1 138 112 91.6 4.55 10.3
sex=2 90 53 73.4 5.68 10.3
Chisq= 10.3 on 1 degrees of freedom, p= 0.00131
The function returns a list of components, including:
 n: the number of subjects in each group.
 obs: the weighted observed number of events in each group.
 exp: the weighted expected number of events in each group.
 chisq: the chisquare statistic for a test of equality.
 strata: optionally, the number of subjects contained in each stratum.
The log rank test for difference in survival gives a pvalue of p = 0.0013, indicating that the sex groups differ significantly in survival.
Fit complex survival curves
In this section, we’ll compute survival curves using the combination of multiple factors. Next, we’ll facet the output of ggsurvplot() by a combination of factors
 Fit (complex) survival curves using colon data sets
require("survival")
fit2 < survfit( Surv(time, status) ~ sex + rx + adhere,
data = colon )
 Visualize the output using survminer. The plot below shows survival curves by the sex variable faceted according to the values of rx & adhere.
# Plot survival curves by sex and facet by rx and adhere
ggsurv < ggsurvplot(fit2, fun = "event", conf.int = TRUE,
ggtheme = theme_bw())
ggsurv$plot +theme_bw() +
theme (legend.position = "right")+
facet_grid(rx ~ adhere)
Summary
Survival analysis is a set of statistical approaches for data analysis where the outcome variable of interest is time until an event occurs.
Survival data are generally described and modeled in terms of two related functions:

the survivor function representing the probability that an individual survives from the time of origin to some time beyond time t. It’s usually estimated by the KaplanMeier method. The logrank test may be used to test for differences between survival curves for groups, such as treatment arms.

The hazard function gives the instantaneous potential of having an event at a time, given survival up to that time. It is used primarily as a diagnostic tool or for specifying a mathematical model for survival analysis.
In this article, we demonstrate how to perform and visualize survival analyses using the combination of two R packages: survival (for the analysis) and survminer (for the visualization).
References
 Clark TG, Bradburn MJ, Love SB and Altman DG. Survival Analysis Part I: Basic concepts and first analyses. British Journal of Cancer (2003) 89, 232 – 238
 Kaplan EL, Meier P (1958) Nonparametric estimation from incomplete observations. J Am Stat Assoc 53: 457–481.
 Pocock S, Clayton TC, Altman DG (2002) Survival plots of timetoevent outcomes in clinical trials: good practice and pitfalls. Lancet 359: 1686– 1689.
Infos
This analysis has been performed using R software (ver. 3.3.2).
Rbloggers.com offers daily email updates about R news and tutorials on topics such as: Data science, Big Data, R jobs, visualization (ggplot2, Boxplots, maps, animation), programming (RStudio, Sweave, LaTeX, SQL, Eclipse, git, hadoop, Web Scraping) statistics (regression, PCA, time series, trading) and more...