Remote pair programming in R using Visual Studio Code and Live Share

[This article was first published on %>% dreams, and kindly contributed to R-bloggers]. (You can report issue about the content on this page here)
Want to share your content on R-bloggers? click here if you have a blog, or here if you don't.

Two ballerina dancers at the barre, one with her leg in the air

  • The Problem
  • State of the Code Editors
  • Installation
  • Configuration
  • Writing an R Package Using VS Code
  • Live Share Tutorial
  • Final Thoughts

The problem

Way back in the Before Time, my older brother and I worked together on an R package called {wizehiver}. To collaborate, we used many tools. We had an email thread (of over 35 emails!) that eventually became two email threads. We tried GitHub Issues, but we were in such close communication that the back-and-forth on issues was ineffectual. We also tried pair programming but since we lived in separate cities, we did it while one of us would share our screen on Skype. We wished there was a better, more hands-on, and immediate way to collaborate in a source code editor in real-time, similar to how seamless it is to work on Google Docs.

State of the code editors

The RStudio IDE is in our opinion the best IDE for R out there; however, live collaboration using RStudio’s Project Sharing feature is limited to those with a paid RStudio Server Pro license as of this writing. There are many source code editors out there, and notably Atom and Visual Studio (VS) Code both provide extensions for free, collaborative real-time editing.

We have been following, with increasing interest, the growing community of developers who have been focused on tools for R in VS Code. There are now several R packages, VS Code extensions, and a command-line R console available, as well as several tutorials dedicated to R in VS Code. Here we set out to see if VS Code could fill the particular gap we identified in our previous work together — the need for seamless remote pair programming. A few of our use cases are:

  1. We wanted to collaborate on this blog post in a shared .Rmd file which we could edit and knit as we wrote. Ultimately we wrote most of this post on Google Docs before transferring it to a versioned .Rmd on GitHub for finishing touches.

  2. We wanted to start collaborating on an open-source R package {mutagen} which will (someday) provide useful extensions to {dplyr}’s mutate():

So far, we only have a hex sticker — #hexdrivendevelopment in action!

Embarrassingly, our last commit to the package was in December 2019. While it would be convenient to blame the pandemic, it was a mix of being busy and other ‘hobby’ projects. However, having a synchronous way of collaborating—where we could see the package being built in action—would enable us to truly get the project underway. Before we begin the tutorial, first we have a public service announcement: if you would like to see Microsoft devote additional resources to support R in VS Code, please upvote R in this vscode-jupyter issue!


We’re going to use Homebrew to facilitate installation steps on macOS. We only provide instructions for macOS here, but we do provide links for macOS users who prefer to install applications using the point-and-click method, and for Linux and Windows users to find the correct binaries. We also indicate which steps are optional.

  1. Open Applications > Utilities > Terminal.

  2. Install Homebrew using the terminal command below, also provided on the Homebrew landing page. Paste this code into your terminal:

/bin/bash -c "$(curl -fsSL"
  1. (Optional) For our favorite free and open-source terminal on macOS, install iTerm2 by pasting this into your terminal:
brew install --cask iterm2
  1. If you don’t have them already, you’ll need R and RStudio Desktop. We’re partial to the preview version of RStudio Desktop which has all the latest features. You can install (and update) them easily from your terminal:
brew install --cask r
brew tap homebrew/cask-versions
brew install --cask rstudio-preview
  1. Install radian, a ‘21st century R console’ and the recommended R console for VS Code.

Update 2021-02-11: Thanks to the efforts of @jdblischak and @randy3k in this closed issue, radian can now be installed with conda-forge instead of only with pip. Most data science tutorials recommend using Python with conda environments, so we suspect that our readers will be more familiar with using conda than pip, as we are. If you do choose to use pip (or python -m pip), beware that pip should be used carefully inside conda environments.

The steps below first install Miniforge, which we prefer to Miniconda since it sets conda-forge as the default channel, then create an empty conda environment named r-console into which we install radian and jedi. jedi is an optional package that enables Python autocompletion using the {reticulate} R package. Paste this into your terminal:

brew install miniforge
conda create --name r-console
conda activate r-console
conda install radian
conda install jedi # for {reticulate} python autocompletion
  1. In RStudio, install the required R packages for VS Code, namely {languageserver} from CRAN and the latest GitHub release of {vscDebugger}:
remotes::install_github("ManuelHentschel/vscDebugger", ref = remotes::github_release())

For the tutorial, make sure that you have the following R packages installed, if you don’t already:

  1. Install VS Code by pasting this into your terminal:
brew install --cask visual-studio-code
  1. Open VS Code and install the following extensions from the Extensions gallery (Shift-Command-X):
  1. R
  2. R LSP Client
  3. R Debugger
  4. Live Share
  5. Live Share Audio


  1. Make sure the r-console environment is still active in your terminal. If it is, your terminal prompt will look like this, or similar:
(r-console) ~ %

If not, then reactivate the r-console environment:

conda activate r-console
  1. Type which radian in your terminal to display the path to the radian executable. Below is what it is on our local machines. Copy the path to your clipboard.
  1. Determine whether bash or zsh is your default shell. If you don’t know, type this into your terminal:
echo $SHELL

Older Macs may still use bash, while newer Macs or those with older Macs who have created new user accounts since upgrading to macOS Catalina will likely run zsh, the new default macOS shell.

  1. Let’s take VS Code for a spin! An useful feature to know about is that typing code <path/file.ext> in your terminal will open a new or existing file in VS Code at the path you specify. Many more details are available in the help page code -h. Depending on whether your default shell is bash or zsh, type code ~/.bashrc or code ~/.zshrc in your terminal to open your shell configuration file, and paste the path you copied in step 2. above to add an alias to radian and bind it to lowercase r:
alias r="/usr/local/Caskroom/miniforge/base/envs/r-console/bin/radian"

You can paste the alias anywhere in the file, but it is probably best to paste it at the very bottom, and avoid inserting it in any preexisting code blocks (e.g., conda initialize blocks) which may be overwritten. Save your configuration file and restart your terminal for the settings to take effect. Now all you need to open radian is to type r in any terminal (Terminal, iTerm2, RStudio, or VS Code)! Useful radian commands to know are:

q() # to exit R, same as with vanilla R and RStudio
;   # to enter shell mode, exit by pressing backspace on an empty line
~   # to enter {reticulate} python mode, exit by pressing backspace on an empty line
  1. To configure your .Rprofile, type code ~/.Rprofile in your terminal, or if you are already set up with {usethis} in RStudio, run the R command usethis::edit_r_profile(). At a minimum, you will want to enable {rstudioapi} emulation in VS Code:
options(vsc.rstudioapi = TRUE)
  1. To configure radian, type code ~/.radian_profile in your terminal which will open up a new blank editor and create a new file named .radian_profile in the home directory. This is our .radian_profile:
    radian.insert_new_line = FALSE,
    radian.escape_key_map = list(
        list(key = "-", value = " <- "),
        list(key = "m", value = " %>% ")

Save ~/.radian_profile and restart your terminal for the settings to take effect.

  1. Now we’ll configure VS Code settings. Open VS Code, and navigate to settings.json by using the Command Palette (Shift-Command-P) and navigating to Preferences: Open Settings (JSON). This is our settings.json:
    // Liveshare: Prompt when receiving focus requests
    "liveshare.focusBehavior": "prompt",
    // R: Treat`` as one word for selection
    "[r]": {
        "editor.wordSeparators": "`~!@#%$^&*()-=+[{]}\\|;:'\",<>/?"
    // R: Use active terminal for all commands
    "r.alwaysUseActiveTerminal": true,
    // R: Use bracketed paste mode when sending code to console (radian)
    "r.bracketedPaste": true,
    // R: R or radian path for macOS
    "r.rterm.mac": "/usr/local/Caskroom/miniforge/base/envs/r-console/bin/radian",
    // R: Enable R session watcher (experimental)
    "r.sessionWatcher": true,
    // R: Remove hidden items when clearing R workspace
    "r.workspaceViewer.removeHiddenItems": true,
    // Telemetry: Disable Microsoft crash reporter
    "telemetry.enableCrashReporter": false,
    // Telemetry: Disable Microsoft telemetry
    "telemetry.enableTelemetry": false,
    // Terminal: Path to integrated shell on macOS
    "": "/bin/zsh"

The r.rterm.mac field above should be the path to radian if you followed the radian installation instructions above, otherwise it should be the path to your R executable (if you don’t know it, type which R in your terminal). Since we use Homebrew to install the latest zsh using brew install zsh, the path to our zsh is /usr/local/bin/zsh, but we have put /bin/zsh above since that is the default zsh location for most macOS users. You should run which r and which zsh to confirm your local settings are correct.

  1. Below are some useful keyboard shortcuts for keybindings.json, found by using the Command Palette (Shift-Command-P) in VS Code and navigating to Preferences: Open Keyboard Shortcuts (JSON). This is our keybindings.json:
        "description": "View: Show R Workspace",
        "key": "alt+r",
        "command": "workbench.view.extension.workspaceViewer"
        "description": "R: Create R Terminal",
        "key": "alt+`",
        "command": "r.createRTerm"
        "description": "R: Insert Assignment Operator",
        "key": "alt+-",
        "command": "type",
        "when": "editorLangId == r || editorLangId == rmd && editorTextFocus",
        "args": { "text": " <- " }
        "description": "R: Insert Pipe Operator",
        "key": "shift+cmd+m",
        "command": "type",
        "when": "editorLangId == r || editorLangId == rmd && editorTextFocus",
        "args": { "text": " %>% " }
        "description": "R: Insert Assignment Pipe Operator",
        "key": "shift+cmd+,",
        "command": "type",
        "when": "editorLangId == r || editorLangId == rmd && editorTextFocus",
        "args": { "text": " %<>% " }
        "description": "R: Insert Tee Pipe Operator",
        "key": "shift+cmd+.",
        "command": "type",
        "when": "editorLangId == r || editorLangId == rmd && editorTextFocus",
        "args": { "text": " %T>% " }
        "description": "R: Test Package",
        "key": "shift+cmd+8",
        "command": "r.test"
        "description": "R: Document",
        "key": "shift+cmd+9",
        "command": "r.document"
        "description": "R: Load All",
        "key": "shift+cmd+0",
        "command": "r.loadAll",

Writing an R Package using VS Code

In this section we’re going to set up a toy R package in VS Code, and in the next section we will enable Live Share.

  1. Open VS Code and use the Command Palette (Shift-Command-P) to navigate to R: Create R Terminal, or use the suggested keyboard shortcut above (Option-`). Note that if you have an editor open and the focus is on the editor, for the shortcut to work you may first need to use Control-` for View: Toggle Integrated Terminal followed by Option-` for R: Create R Terminal. If our configuration above worked for you, these commands should open a terminal instance with the radian console, and the title of the terminal should be 1: R Interactive (or 2: R Interactive if it’s the second active terminal).

  2. In the VS Code R console, create a {mutagen} package folder on your Desktop, declare dependencies, and start an R script for a new function cast_integers():

deps <- c("dplyr", "purrr", "tibble", "vctrs")
purrr::walk(deps, use_package)
  1. In VS Code, open the {mutagen} folder using File > Open… (Command-O) and selecting the mutagen folder in the Desktop. This will open a new VS Code instance and the title bar will read Welcome — mutagen. The R extension icon will be visible on the sidebar since VS Code will detect the .R file in the folder.

  2. Use the Explorer icon in the sidebar (Shift-Command-E) and open the cast_integers.R file. Paste the following code into the editor and save the file:

#' Safely cast numeric columns to integers
#' `cast_integers()` casts all eligible numeric columns in a data frame to integers, without data loss, using `vctrs::vec_cast()` for coercion.
#' @param .data A data frame
#' @return A tibble. If the input data frame has rownames, these will be preserved in a new rowname column.
#' @examples (mtcars_integerized <- cast_integers(mtcars))
#' @export
cast_integers <- function(.data) {
    .data <- tibble::rownames_to_column(.data)
    .data <- tibble::as_tibble(.data)
    int_index <- purrr::map_lgl(
        ~ !inherits(try(vctrs::vec_cast(.x, to = integer()), silent = TRUE), "try-error")
    .data <- dplyr::mutate(
            .cols = any_of(names(which(int_index))),
            .fns = ~ vctrs::vec_cast(.x, to = integer())
  1. Now create a new R console in VS Code using either the keyboard shortcuts (Control-` to toggle the terminal and Option-` to create an R console) or by opening the Command Palette (Shift-Command-P) and navigating to R: Create R Terminal. Focus your view on the R extension by clicking R the sidebar (Option-R), and now test out the package. Below are a series of R console commands to familiarize you with the package development workflow in VS Code. We will load the package, document it, and create a new object in the R workspace that uses the new function we just loaded onto the package environment. To get familiar with the VS Code user interface, we will also print the object in the console, view it with the data viewer, and check out the help file for our new function.
devtools::load_all() # or Shift-Command-0 using keyboard shortcuts above
devtools::document() # or Shift-Command-9 using keyboard shortcuts above
mtcars_integerized <- mtcars %>% cast_integers()

Live share tutorial

Now that we’ve started writing our R package in VS Code, it’s time to Live Share! Microsoft has a handy walkthrough here, but we will explain what we did and detail R project idiosyncrasies that we found.

In order to host a Live Share collaboration session, first you’ll need to sign into Visual Studio Live Share. Click on the Live Share status bar item or press Shift-Command-P and navigate to Live Share: Sign In With Browser. A notification will appear asking you to sign into either a Microsoft or GitHub account using your default web browser.

Once you are signed in, open a folder or file for pair programming. For package development, this would be the project folder for the package (e.g., the {mutagen} folder we created above). Click the Live Share status bar item or type Shift-Command-P and navigate to Live Share: Start Collaboration Session (Share). An invite link will be copied automatically to your clipboard. You can send this link to your collaborator(s) and allow them to join a new session that shares the contents of the folder. Once a collaborator clicks the link, a notification will prompt you to approve the guest before they can join. Please note that guests do not necessarily need to be signed into to collaborate using Live Share, since anonymous guests are allowed; however, the host will need to be signed in. In fact, guests don’t even need to have VS Code installed and can join Live Share from a browser!

Once a guest has joined a collaboration session, all collaborators will immediately be able to see each other’s cursors, edits, and selections in real-time. You can pick a file from the Explorer (Shift-Command-E) and start editing. Both hosts and guests will see edits as they are made.

As we worked on {mutagen} files, we noticed the usual loading of a package in development, via devtools::load_all(), or sourcing an entire file using Shift-Command-S (the VS Code version of RStudio’s Shift-Command-Enter), will not work for the guest. Why? Because the path to the folder directory is different for the host and guest. In our example, instead of the host’s path ~/Desktop/mutagen/R/cast_integers.R, the guest’s path was an abbreviated /R/cast_integers.R, which led to errors when loading and sourcing from keyboard shortcuts. However, the guest can still run the code themselves (such as by selecting and running the source code in an R script, or using Command-Enter line by line) as long as they do not try to source the entire package. We did not try to abstract the path-generating rules for the guests’ Live Share instance into new keyboard shortcuts, but this seems like a solvable problem to allow guests to run devtools::load_all() or source() with minor modifications. Another gotcha was the R workspace; we tried to toggle the setting "liveshare.publishWorkspaceInfo": true in settings.json, but it did not let us share the R workspace between host and guest. It appears that for now host and guest(s) can only maintain separate R workspaces, though it would be useful to have the option to share the R s and its objects.

Final thoughts

We’re excited for the future of R programming in VS Code. Live Share is an outstanding innovation for collaborative real-time editing, and is only one of the many amazing features in VS Code. Here we have only scratched the surface of use cases for Live Share. Microsoft keeps a running list of many other Live Share use cases.

We are also huge fans of RStudio and the RStudio IDE. On our wish list for RStudio is that a live collaboration feature be supported in future versions of RStudio Desktop (not only the Pro version) and RStudio Cloud. Having many excellent options is a good thing! In the meantime, it is clear that VS Code is maturing into a capable IDE for R. Live Share is an attractive and free feature that enables real-time collaboration for the masses and that we hope others will enjoy as much as we have.

Liked this post? I’d love for you to retweet!

To leave a comment for the author, please follow the link and comment on their blog: %>% dreams. offers daily e-mail updates about R news and tutorials about learning R and many other topics. Click here if you're looking to post or find an R/data-science job.
Want to share your content on R-bloggers? click here if you have a blog, or here if you don't.

Never miss an update!
Subscribe to R-bloggers to receive
e-mails with the latest R posts.
(You will not see this message again.)

Click here to close (This popup will not appear again)