Want to share your content on R-bloggers? click here if you have a blog, or here if you don't.

R’s data frames regularly create somewhat of a furor on public forums like Stack Overflow and Reddit. Starting R users often experience problems with the data frame in R and it doesn’t always seem to be straightforward. But does it really need to be so?

Well, not necessarily.

With today’s post, DataCamp wants to show you that data frames don’t need to be hard: we offer you 15 easy, straightforward solutions to the most frequently occurring problems with data.frame. These issues have been selected from the most recent and sticky or upvoted Stack Overflow posts. If, however, you are more interested in getting an elaborate introduction to data frames, you might consider taking a look at our Introduction to R course.

The Root: What’s A Data Frame?

R’s data frames offer you a great first step by allowing you to store your data in overviewable, rectangular grids. Each row of these grids corresponds to measurements or values of an instance, while each column is a vector containing data for a specific variable.

This means that a data frame’s rows do not need to contain, but can contain, the same type of values: they can be numeric, character, logical, etc.; As you can see in the data frame below, each instance, listed in the first unnamed column with a number, has certain characteristics that are spread out over the remaining three columns. Each column needs to consist of values of the same type, since they are data vectors: as such, the breaks column only contains numerical values, while the wool and tension columns have characters as values that are stored as factors.

In case you’re wondering, this data frame lists the number of breaks in yarn during weaving.

Remember that factors are variables that can only contain a limited number of different values. As such, they are often called categorical variables.

head(warpbreaks)

##   breaks wool tension
## 1     26    A       L
## 2     30    A       L
## 3     54    A       L
## 4     25    A       L
## 5     70    A       L
## 6     52    A       L


Maybe you will have already noticed that data frames ressemble matrices, except for the fact that their data values don’t need to be of the same type, while matrices do require this. Data frames also have similarities with lists, which are basically collections of components. A data frame, however, is a list with vector structures of the same length. As such, data frames can actually be seen as special types of lists and can be accessed as either a matrix or a list.

If you want more information or if you just want to review and take a look at a comparison of the five general data structures in R, watch the small video below:

As you can see, there are different data structures that impose different requirements on how the data is stored. Data frames are handy to store multiple data vectors, which makes it easier to organize your data, to apply functions to it and to save your work. It’s almost similar to having a single spreadsheet with elements that all have equal lengths!

The Basics Of Data Frames: The Questions And Solutions

How To Create A Simple Data Frame in R

Even though looking at built-in data frames such as esoph is interesting, it can easily get more exciting!

How?

By making your own data frame in R, of course! You can do this very easily by making some vectors first:

Died.At <- c(22,40,72,41)
Writer.At <- c(16, 18, 36, 36)
First.Name <- c("John", "Edgar", "Walt", "Jane")
Second.Name <- c("Doe", "Poe", "Whitman", "Austen")
Sex <- c("MALE", "MALE", "MALE", "FEMALE")
Date.Of.Death <- c("2015-05-10", "1849-10-07", "1892-03-26","1817-07-18")


Next, you just combine the vectors that you made with the data.frame() function:

writers_df <- data.frame(Died.At, Writer.At, First.Name, Second.Name, Sex, Date.Of.Death)


Remember that data frames must have variables of the same length. Check if you have put an equal number of arguments in all c() functions that you assign to the vectors and that you have indicated strings of words with "".

Note that when you use the data.frame() function, character variables are imported as factors or categorical variables. Use the str() function to get to know more about your data frame.

str(writers_df)

## 'data.frame':    4 obs. of  6 variables:
##  $Died.At : num 22 40 72 41 ##$ Writer.At    : num  16 18 36 36
##  $First.Name : Factor w/ 4 levels "Edgar","Jane",..: 3 1 4 2 ##$ Second.Name  : Factor w/ 4 levels "Austen","Doe",..: 2 3 4 1
##  $Sex : Factor w/ 2 levels "FEMALE","MALE": 2 2 2 1 ##$ Date.Of.Death: Factor w/ 4 levels "1817-07-18","1849-10-07",..: 4 2 3 1


Note that if you’re more interested in inspecting the first and the last lines of your data frame, you can use the head() and tail() functions, respectively.

You see that the First.Name, Second.Name, Sex and Date.Of.Death variables of the writers_df data frame have all been read in as factors. But do you want this?

• For the variables First.Name and Second.Name, you don’t want this. You can use the I() function to insulate them. This function inhibits the interpretation of its arguments. In other words, by just slightly changing the definitions of the vectors First.Name and Second.Name with the addition of the I() function, you can make sure that the proper names are not interpreted as factors.
• You can keep the Sex vector as a factor, because there are only a limited amount of possible values that this variable can have.
• Also for the variable Date.of.Death you don’t want to have a factor. It would be better if the values are registered as dates. You can add the as.Date() function to this variable to make sure this happens.
Died.At <- c(22,40,72,41)
Writer.At <- c(16, 18, 36, 36)
First.Name <- I(c("John", "Edgar", "Walt", "Jane"))
Second.Name <- I(c("Doe", "Poe", "Whitman", "Austen"))
Sex <- c("MALE", "MALE", "MALE", "FEMALE")
Date.Of.Death <- as.Date(c("2015-05-10", "1849-10-07", "1892-03-26","1817-07-18"))
writers_df <- data.frame(Died.At, Writer.At, First.Name, Second.Name, Sex, Date.Of.Death)
str(writers_df)

## 'data.frame':    4 obs. of  6 variables:
##  $Died.At : num 22 40 72 41 ##$ Writer.At    : num  16 18 36 36
##  $First.Name :Class 'AsIs' chr [1:4] "John" "Edgar" "Walt" "Jane" ##$ Second.Name  :Class 'AsIs'  chr [1:4] "Doe" "Poe" "Whitman" "Austen"
##  $Sex : Factor w/ 2 levels "FEMALE","MALE": 2 2 2 1 ##$ Date.Of.Death: Date, format: "2015-05-10" "1849-10-07" ...


If you use other functions such as read.table() or other functions that are used to input data, such as read.csv() and read.delim(), a data frame is returned as the result. This way, files that look like this one below or files that have other delimiters, will be converted to data frames once they are read into R with these functions.

22, 16, John, Doe, MALE, 2015-05-10
40, 18, Edgar, Poe, MALE, 1849-10-07
72, 36, Walt, Whitman, MALE, 1892-03-26
41, 36, Jane, Austen, FEMALE, 1817-07-18


If you want to know more about how you can read and import Excel files into R, make sure to check out our tutorial! Alternatively, you could check out the Rdocumentation page on read.table.

How To Change A Data Frame’s Row And Column Names

Data frames can also have a names attribute, by which you can see the names of the variables that you have included into your data frame. In other words, you can also set the header for your data frame. You already did this before when making the data frame object writers_df; You see that the names of the variables Died.At, Writer.At, First.Name, Second.Name, Sex and Date.Of.Death appear:

writers_df

##   Died.At Writer.At First.Name Second.Name    Sex Date.Of.Death
## 1      22        16       John         Doe   MALE    2015-05-10
## 2      40        18      Edgar         Poe   MALE    1849-10-07
## 3      72        36       Walt     Whitman   MALE    1892-03-26
## 4      41        36       Jane      Austen FEMALE    1817-07-18


You can also retrieve the names with the names() function:

names(writers_df)

## [1] "Died.At"       "Writer.At"     "First.Name"    "Second.Name"
## [5] "Sex"           "Date.Of.Death"


Now that you see the names of your data frame, you’re not so sure if these are efficient or correct. To change the names that appear, you can easily continue using the names() function. Make sure, though, that you have a number of arguments in the c() function that is equal to the number of variables that you have included into your data frame. In this case, since there are six variables Died.At, Writer.At, First.Name, Second.Name, Sex and Death, you want six arguments in the c() function. Otherwise, the other variables will be interpreted as “NA”.

Note also how the arguments of the c() function are inputted as strings!

names(writers_df) <- c("Age.At.Death", "Age.As.Writer", "Name", "Surname", "Gender", "Death")
names(writers_df)

## [1] "Age.At.Death"  "Age.As.Writer" "Name"          "Surname"
## [5] "Gender"        "Death"


Tip: try to leave out the two last arguments from the c() function and see what happens!

Note that you can also access and change the column and row names of your data frame with the functions colnames() and rownames(), respectively:

colnames(writers_df) = c("Age.At.Death", "Age.As.Writer", "Name", "Surname", "Gender", "Death")
rownames(writers_df) = c("ID1", "ID2", "ID3", "ID4")


How To Check A Data Frame’s Dimensions

As you know, the data frame is similar to a matrix, which means that its size is determined by how many rows and columns you have combined into it. To check how many rows and columns you have in your data frame, you can use the dim() function:

dim(writers_df)

## [1] 4 6


The result of this function is represented as [1] 4 6. Just like a matrix, the data frame’s dimensions are defined by the number of rows, followed by the number of columns. If you are in doubt, you can check your numbers through a comparison with the original data frame!

Note that you can also just retrieve the number of rows or columns by entering

dim(writers_df)[1] #Number of rows
dim(writers_df)[2] #Number of columns


or by using the functions nrow() and ncol(), to retrieve the number of rows or columns, respectively:

nrow(writers_df)
ncol(writers_df)


Since the data frame structure is also similar to a list, you could also use the length() function to retrieve the number of rows:

length(writers_df)


How To Access And Change A Data Frame’s Values

…. Through The Variable Names

Now that we have retrieved and set the names of our data frame, we want to take a closer look at the values that are actually stored in it. There are two straightforward ways that you can access these values. First, you can try to access them by just entering the data frame’s name in combination with the variable name:

writers_df$Age.As.Writer  Note that if you change one of the values in the vector Age that this change will not be incorporated into the data frame: Writer.At[1]=2 writers_df ## Age.At.Death Age.As.Writer Name Surname Gender Death ## 1 22 16 John Doe MALE 2015-05-10 ## 2 40 18 Edgar Poe MALE 1849-10-07 ## 3 72 36 Walt Whitman MALE 1892-03-26 ## 4 41 36 Jane Austen FEMALE 1817-07-18  In the end, with this method of accessing the values, you just create a copy of a certain variable! That’s why any changes to the variables do not change the data frame’s variables. … Through The [,] and$ Notations

You can also access the data frame’s values by using the [,] notation:

writers_df [1:2,3] #Value located on the first and second row, third column


gives

## [1] "John"  "Edgar"

writers_df[, 3] #Values located in the third column


gives

## [1] "John"  "Edgar" "Walt"  "Jane"

writers_df[3,] #Values located in the third row


gives

##   Age.At.Death Age.As.Writer Name Surname Gender      Death
## 3           72            36 Walt Whitman   MALE 1892-03-26


Remember that data frames’ dimensions are defined as rows by columns.

An alternative to the [,] notation is a notation with $: writers_df$Age.At.Death


gives

## [1] 22 40 72 41

writers_df$Age.At.Death[3] #Value located on third row of the column Age.At.Death  gives ## [1] 72  Note that you can also change the values of your data frame by simply using these notations to perform mathematical operations: writers_df$Age.At.Death <- writers_df$Age.At.Death-1 writers_df[,1] <- writers_df$Age.At.Death-1


If you really want to make your hands dirty some more and change some of the data frame’s values, you can use the [,] notation to actually change the values inside your data frame one by one:

writers_df[1,3] = "Jane"
writers_df[1,5] = "FEMALE"
writers_df

##   Age.At.Death Age.As.Writer  Name Surname Gender      Death
## 1           22            16  Jane     Doe FEMALE 2015-05-10
## 2           40            18 Edgar     Poe   MALE 1849-10-07
## 3           72            36  Walt Whitman   MALE 1892-03-26
## 4           41            36  Jane  Austen FEMALE 1817-07-18


Why And How To Attach Data Frames

The $notation is pretty handy, but it can become very annoying when you have to type it each time that you want to work with your data. The attach() function offers a solution to this: it takes a data frame as an argument and places it in the search path at position 2. So unless there are variables in position 1 that are exactly the same as the ones from the data frame you have inputted, the variables from your data frame are considered as variables that can be immediately called on. Note that the search path is in fact the order in which R accesses files. You can look this up by entering the search() function: search() ## [1] ".GlobalEnv" "package:knitr" "package:RWordPress" ## [4] "package:REmails" "package:RJSONIO" "package:httr" ## [7] "writers_df" "env:itools" "package:data.table" ## [10] "package:RDatabases" "package:RMySQL" "package:DBI" ## [13] "package:yaml" "package:dplyr" "tools:rstudio" ## [16] "package:stats" "package:graphics" "package:grDevices" ## [19] "package:utils" "package:datasets" "package:methods" ## [22] "Autoloads" "package:base" attach(writers_df) ## The following objects are masked _by_ .GlobalEnv: ## ## Age.As.Writer, Age.At.Death, Death, Gender, Name, Surname writers_df ## Age.At.Death Age.As.Writer Name Surname Gender Death ## 1 22 16 Jane Doe FEMALE 2015-05-10 ## 2 40 18 Edgar Poe MALE 1849-10-07 ## 3 72 36 Walt Whitman MALE 1892-03-26 ## 4 41 36 Jane Austen FEMALE 1817-07-18  Note that you can alternatively use the with() function to attach the data frame, but that this requires you to specify some more arguments: with(writers_df, c("Age.At.Death", "Age.As.Writer", "Name", "Surname", "Gender", "Death")) ## [1] "Age.At.Death" "Age.As.Writer" "Name" "Surname" ## [5] "Gender" "Death" writers_df ## Age.At.Death Age.As.Writer Name Surname Gender Death ## 1 22 16 Jane Doe FEMALE 2015-05-10 ## 2 40 18 Edgar Poe MALE 1849-10-07 ## 3 72 36 Walt Whitman MALE 1892-03-26 ## 4 41 36 Jane Austen FEMALE 1817-07-18  You can now safely execute the following command and you can actually access/change the values of all the data frame’s variables: Age.At.Death ## [1] 22 40 72 41 Age.At.Death <- Age.At.Death-1 Age.At.Death  If you get an error that tells you that “The following objects are masked by .GlobalEnv:”, this is because you have objects in your global environment that have the same name as your data frame. Those objects could be the vectors that you created above, if you didn’t change their names. You have two solutions to this: 1. You just don’t create any objects with those names in your global environment. This is more a solution for those of you who imported their data through read.table(), read.csv() or read.delim(), but not really appropriate for this case. 2. You rename the objects in the data frame so that there’s no conflict. This is the solution that was applied in this tutorial. So, rename your columns with the names() or colnames() functions. Note that if all else fails, you can just remember to always refer to your data frame’s column names with the$ notation!

How To Apply Functions To Data Frames

Now that you have successfully made and modified your data frame by putting a header in place, you can start applying functions to it! In some cases where you want to calculate stuff, you might want to put the numeric data in a separate data frame:

Ages <- writers_df[,1:2]


Only then can you start to get, for example, the mean and the median of your numeric data. You can do this with the apply() function. The first argument of this function should be your smaller data frame, in this case, age. The second argument designates what data you want to consider for the calculations of the mean or median: columns or rows. In this case, we want to calculate the median and mean of the variables Age.At.Death and Age.As.Writer, which designate columns in the data frame. The last argument then specifies the exact calculations that you want to do on your data:

apply(Ages, 2, median)

##  Age.At.Death Age.As.Writer
##          40.5          27.0

apply(Ages,1,median)

## [1] 19.0 29.0 54.0 38.5


or

apply(Ages, 2, mean)

##  Age.At.Death Age.As.Writer
##         43.75         26.50


Do you want to know more about the apply() function and how to use it? Check out our Intermediate R course, which teaches you, amongst other things, how to make your R code more efficient and readable using this function.

Surpassing The Data Frame Basics: More Questions, More Answers

Now that you have been introduced to the basic pitfalls of data frames, it’s time to look at some problems, questions or difficulties that you might have while working with data frames more intensively.

How To Create An Empty Data Frame

The easiest way to create an empty data frame is probably by just assigning a data.frame() function without any arguments to a vector:

ab <- data.frame()
ab

## data frame with 0 columns and 0 rows


You can then start filling your data frame up by using the [,] notation. Be careful, however, because it’s easy to make errors while doing this!

Note how you don’t see any column names in this empty data set. If you do want to have those, you can just initialize empty vectors in your data frame, like this:

Age <- numeric()
Name <- character()
ID <- integer()
Gender <- factor()
Date <- as.Date(character())
ab <- data.frame(c(Age, Name, ID, Gender, Date))
ab

## [1] c.Age..Name..ID..Gender..Date.
## <0 rows> (or 0-length row.names)


How To Extract Rows And Colums, Subseting Your Data Frame

Subsetting or extracting specific rows and columns from a data frame is an important skill in order to surpass the basics that have been introduced in step two, because it allows you to easily manipulate smaller sets of your original data frame. You basically extract those values from the rows and columns that you need in order to optimize the data analyses you make.

It’s easy to start subsetting with the [,] notation that was described in step two:

writer_names_df <- writers_df[1:4, 3:4]
writer_names_df

##    Name Surname
## 1  Jane     Doe
## 2 Edgar     Poe
## 3  Walt Whitman
## 4  Jane  Austen


Note that you can also define this subset with the variable names:

writer_names_df <- writers_df[1:4, c("Name", "Surname")]


Tip: be careful when you are subsetting just one column!

R has the tendency to simplify your results, which means that it will read your subset as a vector, which normally, you don’t want to get. To make sure that this doesn’t happen, you can add the argument drop=FALSE:

writer_names_df <- writers_df[1:4, "Name", drop=FALSE]
str(writer_names_df)

## 'data.frame':    4 obs. of  1 variable:
##  $Name:Class 'AsIs' chr [1:4] "Jane" "Edgar" "Walt" "Jane"  In a next step, you can try subsetting with the subset() function: writer_names_df <- subset(writers_df, Age.At.Death <= 40 & Age.As.Writer >= 18) writer_names_df ## Age.At.Death Age.As.Writer Name Surname Gender Death ## 2 40 18 Edgar Poe MALE 1849-10-07  You can also subset on a particular value: writer_names_df <- subset(writers_df, Name =="Jane") writer_names_df ## Age.At.Death Age.As.Writer Name Surname Gender Death ## 1 22 16 Jane Doe FEMALE 2015-05-10 ## 4 41 36 Jane Austen FEMALE 1817-07-18  You can not only subset with the R functions that have been described above. You can also turn to grep() to get the job done. For example, if you want to work with the rows in the column Age.At.Death that have values that contain “4”, you can use the following line of code: fourty_writers <- writers_df[grep("4", writers_df$Age.At.Death),]
fourty_writers

##   Age.At.Death Age.As.Writer  Name Surname Gender      Death
## 2           40            18 Edgar     Poe   MALE 1849-10-07
## 4           41            36  Jane  Austen FEMALE 1817-07-18


Note that by subsetting, you basically stop considering certain values of your data frame. This might mean that you remove certain features of a factor, by, for example, only considering the MALE members of the writers_df data frame. Notice how all factor levels of this column still remain present, even though you have created a subset:

male_writers <- writers_df[Gender =="MALE",]
str(male_writers)

## 'data.frame':    0 obs. of  6 variables:
##  $Age.At.Death : num ##$ Age.As.Writer: num
##  $Name :Class 'AsIs' chr(0) ##$ Surname      :Class 'AsIs'  chr(0)
##  $Gender : Factor w/ 2 levels "FEMALE","MALE": ##$ Death        :Class 'Date'  num(0)


To remove the factor levels that are no longer present, you can enter the following line of code:

factor(Gender)
## factor(0)
## Levels:

How To Remove Columns And Rows From A Data Frame

If you want to remove values or entire columns from your data frame, you can assign a NULL value to the desired unit:

writers_df[1,3] <- NULL
Age.At.Death <- NULL


To remove rows, the procedure is a bit more complicated. You define a new vector in which you list for every row whether to have it included or not. Then, you apply this vector to your data frame:

rows_to_keep <- c(TRUE, FALSE, TRUE, FALSE)
limited_writers_df <- writers_df[rows_to_keep,]
limited_writers_df

##   Age.At.Death Age.As.Writer Name Surname Gender      Death
## 1           22            16 Jane     Doe FEMALE 2015-05-10
## 3           72            36 Walt Whitman   MALE 1892-03-26


Note that you can also do the opposite by just adding !, stating that the reverse is true:

less_writers_df <- writers_df[!rows_to_keep,]
less_writers_df

##   Age.At.Death Age.As.Writer  Name Surname Gender      Death
## 2           40            18 Edgar     Poe   MALE 1849-10-07
## 4           41            36  Jane  Austen FEMALE 1817-07-18


You can also work with thresholds. For example, you can specify that you only want to keep all writers that were older than fourty when they died:

fourty_sth_writers <- writers_df[writers_df$Age.At.Death > 40,] fourty_sth_writers ## Age.At.Death Age.As.Writer Name Surname Gender Death ## 3 72 36 Walt Whitman MALE 1892-03-26 ## 4 41 36 Jane Austen FEMALE 1817-07-18  How To Add Rows And Columns To A Data Frame Much in the same way that you used the [,] and$ notations to access and change single values of your data frame, you can also easily add columns to your data frame:

writers_df$Location <- c("Belgium", "United Kingdom", "United States", "United Kingdom")  Appending rows to an existing data frame is somewhat more complicated. To easily do this by first making a new row in a vector, respecting the column variables that have been defined in writers_df and by then binding this row to the original data frame with the rbind() function: new_row <- c(50, 22, "Roberto", "Bolano", "MALE", "2003-07-15") writers_df_large <- rbind(writers_df, new_row)  Why And How To Reshape A Data Frame From Wide To Long Format And Vice Versa When you have multiple values, spread out over multiple columns, for the same instance, your data is in the “wide” format. On the other hand, when your data is in the “long” format if there is one observation row per variable. You therefore have multiple rows per instance. Let’s illustrate this with an example. Long data looks like this: Subject <- c(1,2,1,2,2,1) Gender <- c("M", "F", "M", "F", "F","M") Test <- c("Read", "Write", "Write", "Listen", "Read", "Listen") Result <- c(10, 4, 8, 6, 7, 7) observations_long <- data.frame(Subject, Gender, Test, Result) observations_long ## Subject Gender Test Result ## 1 1 M Read 10 ## 2 2 F Write 4 ## 3 1 M Write 8 ## 4 2 F Listen 6 ## 5 2 F Read 7 ## 6 1 M Listen 7  As you can see, there is one row for each value that you have in the Test variable. A lot of statistical tests favor this format. This data frame would look like the following in the wide format: Subject <- c(1,2) Gender <- c("M", "F") Read <- c(10, 7) Write <-c(8, 4) Listen <- c(7, 6) observations_wide <- data.frame(Subject, Gender, Read, Write, Listen) observations_wide ## Subject Gender Read Write Listen ## 1 1 M 10 8 7 ## 2 2 F 7 4 6  You see that each column represents a unique pairing of the various factors with the values. Since different functions may require you to input your data either in “long” or “wide” format, you might need to reshape your data set. There are two main options that you can choose here: you can use the stack() function or you can try using the reshape() function. The former is preferred when you work with simple data frames, while the latter is more often used on more complex data frames, mostly because there’s a difference in the possibilities that both functions offer. Make sure to keep on reading to know more about the differences in possibilities between the stack() and reshape() functions! Using stack() For Simply Structured Data Frames The stack() function basically concatenates or combines multiple vectors into a single vector, along with a factor that indicates where each observation originates from. To go from wide to long format, you will have to stack your observations, since you want one observation row per variable, with multiple rows per variable. In this case, you want to merge the columns Read, Write and Listen together, qua names and qua values: long_format <- stack(observations_wide, select=c(Read, Write, Listen)) long_format ## values ind ## 1 10 Read ## 2 7 Read ## 3 8 Write ## 4 4 Write ## 5 7 Listen ## 6 6 Listen  To go from long to wide format, you will need to unstack your data, which makes sense because you want to have one row per instance with each value present as a different variable. Note here that you want to disentangle the Result and Test columns: wide_format <- unstack(observations_long, Result ~ Test) wide_format ## Listen Read Write ## 1 6 10 4 ## 2 7 7 8  Using reshape() For Complex Data Frames This function is part of the stats package. This function is similar to the stack() function, but is a little bit more elaborate. Read and see for yourself how reshaping your data works with the reshape() function: To go from a wide to a long data format, you can first start off by entering the reshape() function. The first argument should always be your original wide data set. In this case, you can specify that you want to input the observations_wide to be converted to a long data format. Then, you start adding other arguments to the reshape() function: 1. Include a list of variable names that define the different measurements through varying. In this case, you store the scores of specific tests in the columns “Read”, “Write” and “Listen”. 2. Next, add the argumentv.names to specify the name that you want to give to the variable that contains these values in your long dataset. In this case, you want to combine all scores for all reading, writing and listening tests into one variable Score. 3. You also need to give a name to the variable that describes the different measurements that are inputted with the argument timevar. In this case, you want to give a name to the column that contains the types of tests that you give to your students. That’s why this column’s name should be called “Test”. 4. Then, you add the argument times, because you need to specify that the new column “Test” can only take three values, namely, the test components that you have stored: “Read”, “Write”, “Listen”. 5. You’re finally there! Give in the end format for the data with the argument direction. 6. Additionally, you can specify new row names with the argument new.row.names. Tip: try leaving out this last argument and see what happens! library(stats) long_reshape <- reshape(observations_wide, varying = c("Read", "Write", "Listen"), v.names = "Score", timevar = "Test", times = c("Read", "Write", "Listen"), direction = "long", new.row.names = 1:1000) long_reshape ## Subject Gender Test Score id ## 1 1 M Read 10 1 ## 2 2 F Read 7 2 ## 3 1 M Write 8 1 ## 4 2 F Write 4 2 ## 5 1 M Listen 7 1 ## 6 2 F Listen 6 2  From long to wide, you take sort of the same steps. First, you take the reshape() function and give it its first argument, which is the data set that you want to reshape. The other arguments are as follows: 1. timevar allows you to specify that the variable Test, which describes the different tests that you give to your students, should be decomposed. 2. You also specify that the reshape() function shouldn’t take into account the variables Subject and Gender of the original data set. You put these column names into idvar. 3. By not naming the variable Result, the reshape() function will know that both Test and Result should be recombined. 4. You specify the direction of the reshaping, which is in this case, wide! wide_reshape <- reshape(observations_long, timevar = "Test", idvar = c("Subject", "Gender"), direction = "wide") wide_reshape ## Subject Gender Result.Read Result.Write Result.Listen ## 1 1 M 10 8 7 ## 2 2 F 7 4 6  Note that if you want you can also rename or sort the results of these new long and wide data formats! You can find detailed instructions below. Reshaping Data Frames With tidyr This package allows you to “easily tidy data with the spread() and gather() functions” and that’s exactly what you’re going to do if you use this package to reshape your data! If you want to convert from wide to long format, the principle stays similar to the one that of reshape(): you use the gather() function and you start specifying its arguments: 1. Your data set is the first argument to the gather() function 2. Then, you specify the name of the column in which you will combine the the values of Read, Write and Listen. In this case, you want to call it something like Test or Test.Type. 3. You enter the name of the column in which all the values of the Read, Write and Listen columns are listed. 4. You indicate which columns are supposed to be combined into one. In this case, that will be the columns from Read, to Listen. library(tidyr) long_tidyr <- gather(observations_wide, Test, Result, Read:Listen) long_tidyr ## Subject Gender Test Result ## 1 1 M Read 10 ## 2 2 F Read 7 ## 3 1 M Write 8 ## 4 2 F Write 4 ## 5 1 M Listen 7 ## 6 2 F Listen 6  Note how this the last argument specifies the columns in the same way as you did to subset your data frame or to select your data frame’s columns in which you wanted to perform mathematical operations. You can also just specify the columns individually like this: long_tidyr <- gather(observations_wide, Test, Result, Read, Write, Listen)  The opposite direction, from long to wide format, is very similar to the function above, but this time with the spread() function: library(tidyr) wide_tidyr <- spread(observations_long, Test, Result) wide_tidyr ## Subject Gender Listen Read Write ## 1 1 M 7 10 8 ## 2 2 F 6 7 4  Again, you take as the first argument your data set. Then, you specify the column that contains the new column names. In this case, that is Test. Lastly, you input the name of the column that contains the values that should be put into the new columns. Tip: take a look at the “Data Wrangling With dplyr And tidyr Cheat Sheet” for a complete overview of the possibilities that these packages can offer you to wrangle your data! Reshaping Data Frames With reshape2 This package, which allows you to “flexibly reshape data”, actually has very straightforward ways of reshaping your data frame. To go from a wide to a long data format, you use the melt() function. This function is pretty easy, since it just takes your data set and the id.vars argument, which you may already know from the reshape() function. This argument allows you to specify which columns should be left alone by the function. library(reshape2) ## ## Attaching package: 'reshape2' ## ## The following objects are masked from 'package:data.table': ## ## dcast, melt long_reshaped2 <- melt(observations_wide, id.vars=c("Subject", "Gender")) long_reshaped2 ## Subject Gender variable value ## 1 1 M Read 10 ## 2 2 F Read 7 ## 3 1 M Write 8 ## 4 2 F Write 4 ## 5 1 M Listen 7 ## 6 2 F Listen 6  Note that this function allows you to specify a couple more arguments: library(reshape2) long_reshaped2 <- melt(observations_wide, id.vars=c("Subject", "Gender"), measure.vars=c("Read", "Write", "Listen"), variable.name="Test", value.name="Result") long_reshaped2 ## Subject Gender Test Result ## 1 1 M Read 10 ## 2 2 F Read 7 ## 3 1 M Write 8 ## 4 2 F Write 4 ## 5 1 M Listen 7 ## 6 2 F Listen 6  • measure.vars is there to name the destination column that will combine the original columns. If you leave out this argument, the melt() function will use all other variables as the id.vars. • variable.name specifies how you want to name that destination column. If you don’t specify this argument, you will have a column named “variable” in your result. • value.name allows you to input the name of the column in which the values or test results will be stored. If you leave out this argument, this column will be named “measurement”. You can also go from a long to a wide format with the reshape2 package with the dcast() function. This is fairly easy: you first give in your data set, as always. Then, you combine the columns which you don’t want to be touched; In this case, you want to keep Subject and Gender as they are. The column Test however, you want to split! So, that is the second part of your second argument, indicated by a ~. The last argument of this function is value.var, which holds the values of the different tests. You want to name this new column Result: library(reshape2) long_reshaped2 <- dcast(observations_long, Subject + Gender ~ Test, value.var="Result") long_reshaped2 ## Subject Gender Listen Read Write ## 1 1 M 7 10 8 ## 2 2 F 6 7 4  How To Sort A Data Frame Sorting a data frame by columns might seem tricky, but this can be made easy by either using R’s built-in order() function or by using a package. R’s Built-In Order() Function You can for example sort by one of the dataframe’s columns. You order the rows of the data frame according to the values that are stored in the variable Age.As.Writer: writers_df[order(Age.As.Writer),] ## Age.At.Death Age.As.Writer Name Surname Gender Death ## 1 22 16 Jane Doe FEMALE 2015-05-10 ## 2 40 18 Edgar Poe MALE 1849-10-07 ## 3 72 36 Walt Whitman MALE 1892-03-26 ## 4 41 36 Jane Austen FEMALE 1817-07-18  If you want to sort the values starting from high to low, you can just add the extra argument decreasing, which can only take logical values. Remember that logical values are TRUE or FALSE, respectively. Another way is to add the function rev() so that it includes the order() function. As the function’s name suggests, it provides a way to give you the reversed version of its argument, which is order(Name) in this case: writers_df[order(Age.As.Writer, decreasing=TRUE),] writers_df[rev(order(Age.As.Writer)),]  You can also add a - in front of the numeric variable that you have given to order on. writers_df[order(-Age.As.Writer),] ## Age.At.Death Age.As.Writer Name Surname Gender Death ## 3 72 36 Walt Whitman MALE 1892-03-26 ## 4 41 36 Jane Austen FEMALE 1817-07-18 ## 2 40 18 Edgar Poe MALE 1849-10-07 ## 1 22 16 Jane Doe FEMALE 2015-05-10  Sorting With dplyr The dplyr package, known for its abilities to manipulate data, has a specific function that allows you to sort rows by variables. Dplyr’s function to make this happen is arrange(). The first argument of this function is the data set that you want to sort, while the second and third arguments are the variables that you choose to sort. In this case we sort first on the variable Age.At.Death and then on Age.As.Writer. data2 <- arrange(writers_df, Age.At.Death, Age.As.Writer) data2 ## Age.At.Death Age.As.Writer Name Surname Gender Death ## 1 22 16 Jane Doe FEMALE 2015-05-10 ## 2 40 18 Edgar Poe MALE 1849-10-07 ## 3 41 36 Jane Austen FEMALE 1817-07-18 ## 4 72 36 Walt Whitman MALE 1892-03-26  You can also use the following approach to get the same result: writers_df[with(writers_df, order(Age.At.Death, Age.As.Writer)), ]  If you want to sort these columns in descending order, you can add the function desc() to the variables: desc_sorted_data <- arrange(writers_df, desc(Age.At.Death))  Interested in doing much more with the dplyr package? Check out our Data Manipulation in R with dplyr course, which will teach you how to to perform sophisticated data manipulation tasks using dplyr! Also, don’t forget to look at the “Data Wrangling With dplyr And tidyr Cheat Sheet”! How To Merge Data Frames Merging Data Frames On Column Names You can use the merge() function to join two, but only two, data frames. Let’s say we have a data frame data2, which has the same values stored in a variable Age.At.Death, which we also find in writers_df, with exactly the same values. You thus want to merge the two data frames on the basis of this variable: data2 <- data.frame(Age.At.Death=c(22,40,72,41), Location=5:8)  We can easily merge these two: new_writers_df <- merge(writers_df, data2) new_writers_df ## Age.At.Death Age.As.Writer Name Surname Gender Death Location ## 1 22 16 Jane Doe FEMALE 2015-05-10 5 ## 2 40 18 Edgar Poe MALE 1849-10-07 6 ## 3 41 36 Jane Austen FEMALE 1817-07-18 8 ## 4 72 36 Walt Whitman MALE 1892-03-26 7  Tip: check what happens if you change the order of the two arguments of the merge() function! This way of merging is equivalent to an outer join in SQL. Unfortunately, you’re not always this lucky with your data frames. In many cases, some of the columns names or variable values will differ, which makes it hard to follow the easy, standard procedure that was described just now. In addition, you may not always want to merge in the standard way that was described above. In the following, some of the most common issues are listed and solved! What If… (Some Of) The Data Frame’s Column Values Are Different? If (some of) the values of the variable on which you merge differ in the data frames, you have a small problem, because the merge() function supposes that these are the same so that any new variables that are present in the second data frame can be added correctly to the first data frame. Consider the following data frame: data2 <- data.frame(x.Age.At.Death=c(21,39,71,40), Location=5:8)  You see that the values for the attribute Age.At.Death do not fit with the ones that were defined for the writers_df data frame. No worries, the merge() function provides extra arguments to solve this problem. The argument all.x allows you to specify to add the extra rows of the Location variable to the resulting data frame, even though this column is not present in writers_df. In this case, the values of the Location variable will be added to the writers_df data frame for those rows of which the values of the Age.At.Death attribute correspond. All rows where the Age.At.Death of the two data frames don’t correspond, will be filled up with NA values. Note that this join corresponds to a left outer join in SQL and that the default value of the all.x argument is FALSE, which means that one normally only takes into account the corresponding values of the merging variable. Compare with: merge(writers_df, data2, all.x=FALSE)  You can also specify the argument all.y=TRUE if you want to add extra rows for each row that data2 has no matching row in writers_df: merge(writers_df, data2, all.y=TRUE)  Note that this type of join corresponds to a right outer join in SQL. What If… Both Data Frames Have The Same Column Names? What if your two data frames have exactly the same two variables, with or without the same values? data2 <- data.frame(Age.At.Death=c(21,39,71,40), Age.As.Writer=c(11,25,36,28))  You can chose to keep all values from all corresponding variables and to add rows to the resulting data frame: merge(writers_df, data2, all=TRUE) ## Age.At.Death Age.As.Writer Name Surname Gender Death ## 1 21 11 ## 2 22 16 Jane Doe FEMALE 2015-05-10 ## 3 39 25 ## 4 40 18 Edgar Poe MALE 1849-10-07 ## 5 40 28 ## 6 41 36 Jane Austen FEMALE 1817-07-18 ## 7 71 36 ## 8 72 36 Walt Whitman MALE 1892-03-26  Or you can just chose to add values from one specific variable for which the ages of death correspond: merge(writers_df, data2, by="Age.At.Death") ## Age.At.Death Age.As.Writer.x Name Surname Gender Death ## 1 40 18 Edgar Poe MALE 1849-10-07 ## Age.As.Writer.y ## 1 28  What If… The Data Frames’ Column Names Are Different? Lastly, what if the variable’s names on which you merge differ in the two data frames? data2 <- data.frame(Age=c(22,40,72,41), Location=5:8)  You just specify in the merge() function that there are two other specifications through the arguments by.x and by.y. merge(writers_df, data2, by.x="Age.At.Death", by.y="Age") # Age.At.Death Age.As.Writer Name Surname Gender Death Location ## 1 22 16 Jane Doe FEMALE 2015-05-10 5 ## 2 40 18 Edgar Poe MALE 1849-10-07 6 ## 3 41 36 Jane Austen FEMALE 1817-07-18 8 ## 4 72 36 Walt Whitman MALE 1892-03-26 7  Merging Data Frames On Row Names You can indeed merge the columns of two data frames, that contain a distinct set of columns but some rows with the same names. The merge() function and its arguments come to the rescue! Consider this second data frame: Address <- c("50 West 10th", "77 St. Marks Place", "778 Park Avenue") Maried <- c("YES", "NO", "YES") limited_writers_df <- data.frame(Address, Maried) limited_writers_df ## Address Maried ## 1 50 West 10th YES ## 2 77 St. Marks Place NO ## 3 778 Park Avenue YES  You see that this data set contains three rows, marked with numbers 1 to 3, and two additional columns that are not in the writers_df data frame. To merge these two data frames, we add the argument by to the merge() function and set it at the number 0, which specifies the row names. Since you choose to keep all values from all corresponding variables and to add columns to the resulting data frame, you set the all argument to TRUE: writers_row_sorted <- merge(writers_df, limited_writers_df, by=0, all=TRUE) writers_row_sorted ## Row.names Age.At.Death Age.As.Writer Name Surname Gender Death ## 1 1 22 16 Jane Doe FEMALE 2015-05-10 ## 2 2 40 18 Edgar Poe MALE 1849-10-07 ## 3 3 72 36 Walt Whitman MALE 1892-03-26 ## 4 4 41 36 Jane Austen FEMALE 1817-07-18 ## Address Maried ## 1 50 West 10th YES ## 2 77 St. Marks Place NO ## 3 778 Park Avenue YES ## 4  It could be that the fields for rows that don’t occur in both data frames result in NA-values. You can easily solve this by removing them. This will be discussed below. How To Remove Data Frames’ Rows And Columns With NA-Values To remove all rows that contain NA-values, one of the easiest options is to use the na.omit() function, which takes your data frame as an argument. Let’s recycle the code from the previous section in which two data frames were merged, with a lot of resulting NA-values: data2 <- data.frame(Age.At.Death=c(21,39,71,40), Location=5:8) merge <- merge(writers_df, data2, all.y=TRUE) na.omit(merge) ## Age.At.Death Age.As.Writer Name Surname Gender Death Location ## 3 40 18 Edgar Poe MALE 1849-10-07 8  If you just want to select part of your data frame from which you want to remove the NA-values, it’s better to use complete.cases(). In this case, you’re interested to keep all rows for which the values of the columns Age.As.Writer and Name are complete: data2 <- data.frame(Age.At.Death=c(21,39,71,40), Location=5:8) merge <- merge(writers_df, data2, all.y=TRUE) merge[complete.cases(merge[,2:3]),] ## Age.At.Death Age.As.Writer Name Surname Gender Death Location ## 3 40 18 Edgar Poe MALE 1849-10-07 8  How To Convert Lists Or Matrices To Data Frames And Back From Lists or Matrices To Data Frames Lists or matrices that comply with the restrictions that the data frame imposes can be coerced into data frames with the as.data.frame() function. Remember that a data frame is similar to the structure of a matrix, where the columns can be of different types. Data frames are also similar to lists, where each column is an element of the list and each element has the same length. Any matrices or lists that you want to convert to data frames need to satisfy with these restrictions. For example, the matrix A can be converted to a data frame because each column contains values of the numeric data type: A = matrix(c(2, 4, 3, 1, 5, 7), nrow=2, ncol=3, byrow = TRUE) A ## [,1] [,2] [,3] ## [1,] 2 4 3 ## [2,] 1 5 7  You enter the matrix A as an argument to the as.data.frame() function: A_df <- as.data.frame(A) A_df ## V1 V2 V3 ## 1 2 4 3 ## 2 1 5 7  You can follow the same procedures for lists like the one that is shown below: n = c(2, 3, 5) s = c("aa", "bb", "cc") b = c(TRUE, FALSE, TRUE) x = list(n, s, b, 3) x_df <- as.data.frame(x)  Changing A Data Frame To A Matrix Or List To make the opposite move, that is, to convert data frames to matrices and lists, you first have to check for yourself if this is possible. Does you data frame contain one or more dimensions and what about the amount of data types? Rewatch the small animation of the introduction if you’re not sure what data structure to pick. Once you have an answer, you can use the functions as.matrix() and as.list() to convert your data frame to a matrix or a list, respectively: writers_matrix <- as.matrix(writers_df) writers_matrix ## Age.At.Death Age.As.Writer Name Surname Gender Death ## [1,] "22" "16" "Jane" "Doe" "FEMALE" "2015-05-10" ## [2,] "40" "18" "Edgar" "Poe" "MALE" "1849-10-07" ## [3,] "72" "36" "Walt" "Whitman" "MALE" "1892-03-26" ## [4,] "41" "36" "Jane" "Austen" "FEMALE" "1817-07-18" writers_list <- as.list(writers_df) writers_list ##$Age.At.Death
## [1] 22 40 72 41
##
## $Age.As.Writer ## [1] 16 18 36 36 ## ##$Name
## [1] "Jane"  "Edgar" "Walt"  "Jane"
##
## $Surname ## [1] "Doe" "Poe" "Whitman" "Austen" ## ##$Gender
## [1] FEMALE MALE   MALE   FEMALE
## Levels: FEMALE MALE
##
## \$Death
## [1] "2015-05-10" "1849-10-07" "1892-03-26" "1817-07-18"


For those of you who want to specifically make numeric matrices, you can use the function data.matrix() or add an sapply() function to the as.matrix() function:

writers_matrix <- data.matrix(writers_df)
writers_matrix <- as.matrix(sapply(writers_df, as.numeric))


Note that with the current writers_df data frame, which contains a mixture of data types, NA-values will be introduced in the resulting matrices.

From Data Frames To Data Analysis, Data Manipulation and Data Visualization

Data frames are just the beginning of your data analysis! There is much more to see and know about data frames and the other R data structures. If this tutorial has gotten you thrilled to dig deeper into programming with R, make sure to check out our free interactive Introduction to R course. Those of you who are already more advanced with R and that want to take their skills to a higher level might be interested in our courses on data manipulation and data visualization. Go to our course overview and take a look!

The post 15 Easy Solutions To Your Data Frame Problems In R appeared first on The DataCamp Blog .