Time Series in 5-Minutes, Part 1: Data Wrangling and Rolling Calculations

[This article was first published on business-science.io, and kindly contributed to R-bloggers]. (You can report issue about the content on this page here)
Want to share your content on R-bloggers? click here if you have a blog, or here if you don't.

Have 5-minutes? Then let’s learn time series. In this short articles series, I highlight how you can get up to speed quickly on important aspects of time series analysis. Today we are focusing preparing data for timeseries analysis rolling calculations.

Updates

This article has been updated. View the updated Time Series in 5-Minutes article at Business Science.

Time Series in 5-Mintues
Articles in this Series

I just released timetk 2.0.0 (read the release announcement). A ton of new functionality has been added. We’ll discuss some of the key pieces in this article series:

???? Register for our blog to get new articles as we release them.

Have 5-Minutes?
Then let’s learn Rolling Calculations

A collection of tools for working with time series in R Time series data wrangling is an essential skill for any forecaster. timetk includes the essential data wrangling tools. In this tutorial:

  • Summarise by Time – For time-based aggregations
  • Filter by Time – For complex time-based filtering
  • Pad by Time – For filling in gaps and going from low to high frequency
  • Slidify – For turning any function into a sliding (rolling) function

Additional concepts covered:

  • Imputation – Needed for Padding (See Low to High Frequency)
  • Advanced Filtering – Using the new add time %+time infix operation (See Padding Data: Low to High Frequency)
  • Visualizationplot_time_series() for all visualizations

Advanced Time Series Course
Become the times series domain expert in your organization.

Make sure you’re notified when my new Advanced Time Series Forecasting in R course comes out. You’ll learn timetk and modeltime plus the most powerful time series forecasting techiniques available. Become the times series domain expert in your organization.

???? Get notified here: Advanced Time Series Course.


You will learn:

  • Time Series Preprocessing, Noise Reduction, & Anomaly Detection
  • Feature engineering using lagged variables & external regressors
  • Hyperparameter tuning
  • Time series cross-validation
  • Ensembling Multiple Machine Learning & Univariate Modeling Techniques (Competition Winner)
  • NEW – Deep Learning with RNNs (Competition Winner)
  • and more.

Signup for the Time Series Course waitlist

Let’s Get Started

library(tidyverse)
library(tidyquant) 
library(timetk)

Data

This tutorial will use the FANG dataset:

  • Daily
  • Irregular (missing business holidays and weekends)
  • 4 groups (FB, AMZN, NFLX, and GOOG).
FANG

adjusted column

The adjusted column contains the adjusted closing prices for each day.

FANG %>%
  group_by(symbol) %>%
  plot_time_series(date, adjusted, .facet_ncol = 2, .interactive = FALSE)

times series plot 1

The volume column contains the trade volume (number of times the stock was transacted) for the day.

FANG %>%
  group_by(symbol) %>%
  plot_time_series(date, volume, .facet_ncol = 2, .interactive = FALSE)

times series plot 2

Summarize by Time

summarise_by_time() aggregates by a period. It’s great for:

  • Period Aggregation – SUM()
  • Period Smoothing – AVERAGE(), FIRST(), LAST()

Period Summarization

Objective: Get the total trade volume by quarter

  • Use SUM()
  • Aggregate using .by = "quarter"
FANG %>%
  group_by(symbol) %>%
  summarise_by_time(
    date, .by = "quarter",
    volume = SUM(volume)
  ) %>%
  plot_time_series(date, volume, .facet_ncol = 2, .interactive = FALSE, .y_intercept = 0)

times series plot 3

Period Smoothing

Objective: Get the first value in each month

  • We can use FIRST() to get the first value, which has the effect of reducing the data (i.e. smoothing). We could use AVERAGE() or MEDIAN().
  • Use the summarization by time: .by = "month" to aggregate by month.
FANG %>%
  group_by(symbol) %>%
  summarise_by_time(
    date, .by = "month",
    adjusted = FIRST(adjusted)
  ) %>%
  plot_time_series(date, adjusted, .facet_ncol = 2, .interactive = FALSE)

times series plot 4

Filter By Time

Used to quickly filter a continuous time range.

Time Range Filtering

Objective: Get the adjusted stock prices in the 3rd quarter of 2013.

  • .start_date = "2013-09": Converts to “2013-09-01
  • .end_date = "2013": Converts to “2013-12-31
  • A more advanced example of filtering using %+time and %-time is shown in “Padding Data: Low to High Frequency”.
FANG %>%
  group_by(symbol) %>%
  filter_by_time(date, "2013-09", "2013") %>%
  plot_time_series(date, adjusted, .facet_ncol = 2, .interactive = FALSE)

times series plot 5

Padding Data

Used to fill in (pad) gaps and to go from from low frequency to high frequency. This function uses the awesome padr library for filling and expanding timestamps.

Fill in Gaps

Objective: Make an irregular series regular.

  • We will leave padded values as NA.
  • We can add a value using .pad_value or we can impute using a function like ts_impute_vec() (shown next).
FANG %>%
  group_by(symbol) %>%
  pad_by_time(date, .by = "auto") # Guesses .by = "day"

padding data

Low to High Frequency

Objective: Go from Daily to Hourly timestamp intervals for 1 month from the start date. Impute the missing values.

  • .by = "hour" pads from daily to hourly
  • Imputation of hourly data is accomplished with ts_impute_vec(), which performs linear interpolation when period = 1.
  • Filtering is accomplished using:
    • “start”: A special keyword that signals the start of a series
    • FIRST(date) %+time% "1 month": Selecting the first date in the sequence then using a special infix operation, %+time%, called “add time”. In this case I add “1 month”.
FANG %>%
  group_by(symbol) %>%
  pad_by_time(date, .by = "hour") %>%
  mutate_at(vars(open:adjusted), .funs = ts_impute_vec, period = 1) %>%
  filter_by_time(date, "start", FIRST(date) %+time% "1 month") %>%
  plot_time_series(date, adjusted, .facet_ncol = 2, .interactive = FALSE) 

times series plot 6

Sliding (Rolling) Calculations

We have a new function, slidify() that turns any function into a sliding (rolling) window function. It takes concepts from tibbletime::rollify() and it improves them with the R package slider.

Rolling Mean

Objective: Calculate a “centered” simple rolling average with partial window rolling and the start and end windows.

  • slidify() turns the AVERAGE() function into a rolling average.
# Make the rolling function
roll_avg_30 <- slidify(.f = AVERAGE, .period = 30, .align = "center", .partial = TRUE)
# Apply the rolling function
FANG %>%
  select(symbol, date, adjusted) %>%
  group_by(symbol) %>%
  # Apply Sliding Function
  mutate(rolling_avg_30 = roll_avg_30(adjusted)) %>%
  pivot_longer(cols = c(adjusted, rolling_avg_30)) %>%
  plot_time_series(date, value, .color_var = name,
                   .facet_ncol = 2, .smooth = FALSE, 
                   .interactive = FALSE)

times series plot 7

For simple rolling calculations (rolling average), we can accomplish this operation faster with slidify_vec() – A vectorized rolling function for simple summary rolls (e.g. mean(), sd(), sum(), etc)

FANG %>%
  select(symbol, date, adjusted) %>%
  group_by(symbol) %>%
  # Apply roll apply Function
  mutate(rolling_avg_30 = slidify_vec(adjusted,  ~ AVERAGE(.), 
                                      .period = 30, .partial = TRUE))

rolling mean

Rolling Regression

Objective: Calculate a rolling regression.

  • This is a complex sliding (rolling) calculation that requires multiple columns to be involved.
  • slidify() is built for this.
  • Use the multi-variable purrr ..1, ..2, ..3, etc notation to setup a function
# Rolling regressions are easy to implement using `.unlist = FALSE`
lm_roll <- slidify(~ lm(..1 ~ ..2 + ..3), .period = 90, 
                   .unlist = FALSE, .align = "right")
FANG %>%
  select(symbol, date, adjusted, volume) %>%
  group_by(symbol) %>%
  mutate(numeric_date = as.numeric(date)) %>%
  # Apply rolling regression
  mutate(rolling_lm = lm_roll(adjusted, volume, numeric_date)) %>%
  filter(!is.na(rolling_lm))

rolling regression

Advanced Time Series Course
Become the times series domain expert in your organization.

Make sure you’re notified when my new Advanced Time Series Forecasting in R course comes out. You’ll learn timetk and modeltime plus the most powerful time series forecasting techiniques available. Become the times series domain expert in your organization.

???? Get notified here: Advanced Time Series Course.


You will learn:

  • Time Series Preprocessing, Noise Reduction, & Anomaly Detection
  • Feature engineering using lagged variables & external regressors
  • Hyperparameter tuning
  • Time series cross-validation
  • Ensembling Multiple Machine Learning & Univariate Modeling Techniques (Competition Winner)
  • NEW – Deep Learning with RNNs (Competition Winner)
  • and more.

Signup for the Time Series Course waitlist


Have questions on using Timetk for time series?

Make a comment in the chat below. ????

And, if you plan on using timetk for your business, it’s a no-brainer – Join my Time Series Course Waitlist (It’s coming, it’s really insane).

To leave a comment for the author, please follow the link and comment on their blog: business-science.io.

R-bloggers.com offers daily e-mail updates about R news and tutorials about learning R and many other topics. Click here if you're looking to post or find an R/data-science job.
Want to share your content on R-bloggers? click here if you have a blog, or here if you don't.

Never miss an update!
Subscribe to R-bloggers to receive
e-mails with the latest R posts.
(You will not see this message again.)

Click here to close (This popup will not appear again)