Site icon R-bloggers

dtplyr speed benchmarks

[This article was first published on R on Just be-cause, and kindly contributed to R-bloggers]. (You can report issue about the content on this page here)
Want to share your content on R-bloggers? click here if you have a blog, or here if you don't.

R has many great tools for data wrangling. Two of those are the dplyr and data.table packages. When people wonder which one should they learn it is often argued that dplyr is considerably slower compared with data.table.

Granted, data.table is blazing fast, but I personally find the syntax hard and un-intuitive and the speed difference doesn’t make much of a difference in most use cases I encountered.

The only frequent scenario where I’ve experienced a significant performance gap is when doing operations over a very large number of groups. This can happen when for example working with customer data, where each row describes a touch point or transaction and one is interested with calculating the number of rows per customer, monetary value of all transactions per customer etc.

Recently Rstudio released dtplyr package version 1.0.0 which provides a data.table backend for dplyr.

Using dtplyr requires learning almost no additional code. One initiates a data.table sequence using the lazy_dt function, after which regular dplyr code is written. Execution of the code is done only when calling as_tibble (or as.data.frame etc).

So for example a simple pipeline utilizing dtplyr for many group operations would look like:

mtcars %>%
  lazy_dt() %>%
  filter(wt < 5) %>%
  mutate(l100k = 235.21 / mpg) %>% # liters / 100 km
  group_by(cyl) %>%
  summarise(l100k = mean(l100k))
## Source: local data table [?? x 2]
## Call:   `_DT1`[wt < 5][, `:=`(l100k = 235.21/mpg)][, .(l100k = mean(l100k)), 
##     keyby = .(cyl)]
## 
##     cyl l100k
##   <dbl> <dbl>
## 1     4  9.05
## 2     6 12.0 
## 3     8 14.9 
## 
## # Use as.data.table()/as.data.frame()/as_tibble() to access results

The only caveat is, as with all other dbplyr like interfaces, that some of the more complex operations might not be supported.

Interestingly enough, I wasn’t able to find any bench-marking for dtplyr other than a walled piece on Medium. So I decided to go ahead and run a quick benchmark test myself.

In this post I’ll check by how much does dtplyr improve on dplyr and whether it’s performance is close enough to data.table to be considered a valid alternative.

To that end, I’ll reproduce some of the benchmarking done by data.table author Matt Dowle back at Dec 2018.

The bench-marking consist of:

My analysis will diverge from the original in the following respects:

  1. I’ll compare data.table, dtyplr and dplyr. I’ll also check how starting a dtplyr pipe with a data.table rather than a data.frame affects performance (dubbed dt_dtplyr below)
  2. I’ll use my personal laptop instead of spinning up a virtual machine
  3. I’m generating a much smaller dataset (~4.9 Gb). I think that is representative of some of the larger datasets I’ve worked with in-memory (for larger datasets I usually switch to Spark).

Other than that the code is mostly the same.

< details> < summary>data.table benchmark code

require(data.table)
N <- 1e8
K <- 100
set.seed(1)
DT <- data.table(
  id1 = sample(sprintf("id%03d", 1:K), N, TRUE), # large groups (char)
  id2 = sample(sprintf("id%03d", 1:K), N, TRUE), # large groups (char)
  id3 = sample(sprintf("id%010d", 1:(N / K)), N, TRUE), # small groups (char)
  id4 = sample(K, N, TRUE), # large groups (int)
  id5 = sample(K, N, TRUE), # large groups (int)
  id6 = sample(N / K, N, TRUE), # small groups (int)
  v1 = sample(5, N, TRUE), # int in range [1,5]
  v2 = sample(5, N, TRUE), # int in range [1,5]
  v3 = sample(round(runif(100, max = 100), 4), N, TRUE) # numeric e.g. 23.5749
)

q1a <- system.time(DT[, sum(v1), keyby = id1])[3]
q1b <- system.time(DT[, sum(v1), keyby = id1])[3]
q2a <- system.time(DT[, sum(v1), keyby = "id1,id2"])[3]
q2b <- system.time(DT[, sum(v1), keyby = "id1,id2"])[3]
q3a <- system.time(DT[, list(sum(v1), mean(v3)), keyby = id3])[3]
q3b <- system.time(DT[, list(sum(v1), mean(v3)), keyby = id3])[3]
q4a <- system.time(DT[, lapply(.SD, mean), keyby = id4, .SDcols = 7:9])[3]
q4b <- system.time(DT[, lapply(.SD, mean), keyby = id4, .SDcols = 7:9])[3]
q5a <- system.time(DT[, lapply(.SD, sum), keyby = id6, .SDcols = 7:9])[3]
q5b <- system.time(DT[, lapply(.SD, sum), keyby = id6, .SDcols = 7:9])[3]
data_table_results <- list(
  q1a = q1a, q1b = q1b,
  q2a = q2a, q2b = q2b,
  q3a = q3a, q3b = q3b,
  q4a = q4a, q4b = q4b,
  q5a = q5a, q5b = q5b
)
< details> < summary>dtplyr benchmark code

require(dplyr)
require(dtplyr)
N <- 1e8
K <- 100
set.seed(1)
DF <- data.frame(
  stringsAsFactors = FALSE,
  id1 = sample(sprintf("id%03d", 1:K), N, TRUE),
  id2 = sample(sprintf("id%03d", 1:K), N, TRUE),
  id3 = sample(sprintf("id%010d", 1:(N / K)), N, TRUE),
  id4 = sample(K, N, TRUE),
  id5 = sample(K, N, TRUE),
  id6 = sample(N / K, N, TRUE),
  v1 = sample(5, N, TRUE),
  v2 = sample(5, N, TRUE),
  v3 = sample(round(runif(100, max = 100), 4), N, TRUE)
)

q1a <- system.time(DF %>% lazy_dt() %>% group_by(id1) %>%
  summarise(sum(v1)) %>% as_tibble())[3]
q1b <- system.time(DF %>% lazy_dt() %>% group_by(id1) %>%
  summarise(sum(v1)) %>% as_tibble())[3]
q2a <- system.time(DF %>% lazy_dt() %>% group_by(id1, id2) %>%
  summarise(sum(v1)) %>% as_tibble())[3]
q2b <- system.time(DF %>% lazy_dt() %>% group_by(id1, id2) %>%
  summarise(sum(v1)) %>% as_tibble())[3]
q3a <- system.time(DF %>% lazy_dt() %>% group_by(id3) %>% summarise(sum(v1), mean(v3)) %>% as_tibble())[3]
q3b <- system.time(DF %>% lazy_dt() %>% group_by(id3) %>%
  summarise(sum(v1), mean(v3)) %>% as_tibble())[3]
q4a <- system.time(DF %>% lazy_dt() %>% group_by(id4) %>%
  summarise_at(vars(v1:v3), mean) %>% as_tibble())[3]
q4b <- system.time(DF %>% lazy_dt() %>% group_by(id4) %>%
  summarise_at(vars(v1:v3), mean) %>% as_tibble())[3]
q5a <- system.time(DF %>% lazy_dt() %>% group_by(id6) %>%
  summarise_at(vars(v1:v3), sum) %>% as_tibble())[3]
q5b <- system.time(DF %>% lazy_dt() %>% group_by(id6) %>%
  summarise_at(vars(v1:v3), sum) %>% as_tibble())[3]

dtplyr_results <- list(
  q1a = q1a, q1b = q1b,
  q2a = q2a, q2b = q2b,
  q3a = q3a, q3b = q3b,
  q4a = q4a, q4b = q4b,
  q5a = q5a, q5b = q5b
)
< details> < summary>dt_dtplyr benchmark code

require(dplyr)
require(dtplyr)
library(data.table)
N <- 1e8
K <- 100
set.seed(1)
DF <- data.frame(
  stringsAsFactors = FALSE,
  id1 = sample(sprintf("id%03d", 1:K), N, TRUE),
  id2 = sample(sprintf("id%03d", 1:K), N, TRUE),
  id3 = sample(sprintf("id%010d", 1:(N / K)), N, TRUE),
  id4 = sample(K, N, TRUE),
  id5 = sample(K, N, TRUE),
  id6 = sample(N / K, N, TRUE),
  v1 = sample(5, N, TRUE),
  v2 = sample(5, N, TRUE),
  v3 = sample(round(runif(100, max = 100), 4), N, TRUE)
)

DF <- as.data.table(DF)

q1a <- system.time(DF %>% lazy_dt() %>% group_by(id1) %>%
  summarise(sum(v1)) %>% as_tibble())[3]
q1b <- system.time(DF %>% lazy_dt() %>% group_by(id1) %>%
  summarise(sum(v1)) %>% as_tibble())[3]
q2a <- system.time(DF %>% lazy_dt() %>% group_by(id1, id2) %>%
  summarise(sum(v1)) %>% as_tibble())[3]
q2b <- system.time(DF %>% lazy_dt() %>% group_by(id1, id2) %>%
  summarise(sum(v1)) %>% as_tibble())[3]
q3a <- system.time(DF %>% lazy_dt() %>% group_by(id3) %>% summarise(sum(v1), mean(v3)) %>% as_tibble())[3]
q3b <- system.time(DF %>% lazy_dt() %>% group_by(id3) %>%
  summarise(sum(v1), mean(v3)) %>% as_tibble())[3]
q4a <- system.time(DF %>% lazy_dt() %>% group_by(id4) %>%
  summarise_at(vars(v1:v3), mean) %>% as_tibble())[3]
q4b <- system.time(DF %>% lazy_dt() %>% group_by(id4) %>%
  summarise_at(vars(v1:v3), mean) %>% as_tibble())[3]
q5a <- system.time(DF %>% lazy_dt() %>% group_by(id6) %>%
  summarise_at(vars(v1:v3), sum) %>% as_tibble())[3]
q5b <- system.time(DF %>% lazy_dt() %>% group_by(id6) %>%
  summarise_at(vars(v1:v3), sum) %>% as_tibble())[3]

dt_dtplyr_results <- list(
  q1a = q1a, q1b = q1b,
  q2a = q2a, q2b = q2b,
  q3a = q3a, q3b = q3b,
  q4a = q4a, q4b = q4b,
  q5a = q5a, q5b = q5b
)
< details> < summary>dplyr benchmark code

library(dplyr)
N <- 1e8
K <- 100
set.seed(1)
DF <- data.frame(
  stringsAsFactors = FALSE,
  id1 = sample(sprintf("id%03d", 1:K), N, TRUE),
  id2 = sample(sprintf("id%03d", 1:K), N, TRUE),
  id3 = sample(sprintf("id%010d", 1:(N / K)), N, TRUE),
  id4 = sample(K, N, TRUE),
  id5 = sample(K, N, TRUE),
  id6 = sample(N / K, N, TRUE),
  v1 = sample(5, N, TRUE),
  v2 = sample(5, N, TRUE),
  v3 = sample(round(runif(100, max = 100), 4), N, TRUE)
)

q1a <- system.time(DF %>% group_by(id1) %>% summarise(sum(v1)) %>% as_tibble())[3]
q1b <- system.time(DF %>% group_by(id1) %>% summarise(sum(v1)) %>% as_tibble())[3]
q2a <- system.time(DF %>% group_by(id1, id2) %>% summarise(sum(v1)) %>% as_tibble())[3]
q2b <- system.time(DF %>% group_by(id1, id2) %>% summarise(sum(v1)) %>% as_tibble())[3]
q3a <- system.time(DF %>% group_by(id3) %>% summarise(sum(v1), mean(v3)) %>% as_tibble())[3]
q3b <- system.time(DF %>% group_by(id3) %>%
  summarise(sum(v1), mean(v3)) %>% as_tibble())[3]
q4a <- system.time(DF %>% group_by(id4) %>%
  summarise_at(vars(v1:v3), mean) %>% as_tibble())[3]
q4b <- system.time(DF %>% group_by(id4) %>%
  summarise_at(vars(v1:v3), mean) %>% as_tibble())[3]
q5a <- system.time(DF %>% group_by(id6) %>%
  summarise_at(vars(v1:v3), sum) %>% as_tibble())[3]
q5b <- system.time(DF %>% group_by(id6) %>%
  summarise_at(vars(v1:v3), sum) %>% as_tibble())[3]

dplyr_results <- list(
  q1a = q1a, q1b = q1b,
  q2a = q2a, q2b = q2b,
  q3a = q3a, q3b = q3b,
  q4a = q4a, q4b = q4b,
  q5a = q5a, q5b = q5b
)

We can see that using dtplyr improves the performance quite a bit, though still not as fast as data.table. It would seem however that most of the difference stems from the need to convert the data.frame object to a data.table one. That can be done once when reading in the file for example. Thus it would seem that ultimately the sacrifice in performance for the added benefit of tidy syntax (for those who dig tidy) isn’t too bad.

Personally, I’m hooked on the tidyverse and the dtplyr package is just another reason to keep using it, even for operations over a large number of groups.

Session info

sessionInfo()
## R version 3.6.2 (2019-12-12)
## Platform: x86_64-apple-darwin15.6.0 (64-bit)
## Running under: macOS Mojave 10.14.6
## 
## Matrix products: default
## BLAS:   /Library/Frameworks/R.framework/Versions/3.6/Resources/lib/libRblas.0.dylib
## LAPACK: /Library/Frameworks/R.framework/Versions/3.6/Resources/lib/libRlapack.dylib
## 
## locale:
## [1] en_US.UTF-8/en_US.UTF-8/en_US.UTF-8/C/en_US.UTF-8/en_US.UTF-8
## 
## attached base packages:
## [1] stats     graphics  grDevices utils     datasets  methods   base     
## 
## other attached packages:
##  [1] data.table_1.12.8 pander_0.6.3      dtplyr_1.0.0      forcats_0.4.0    
##  [5] stringr_1.4.0     dplyr_0.8.5       purrr_0.3.4       readr_1.3.1      
##  [9] tidyr_1.0.3       tibble_3.0.1      ggplot2_3.3.0     tidyverse_1.3.0  
## [13] pacman_0.5.1     
## 
## loaded via a namespace (and not attached):
##  [1] tidyselect_1.1.0 xfun_0.12        haven_2.2.0      lattice_0.20-38 
##  [5] colorspace_1.4-1 vctrs_0.3.0      generics_0.0.2   htmltools_0.4.0 
##  [9] yaml_2.2.1       utf8_1.1.4       rlang_0.4.6      pillar_1.4.4    
## [13] glue_1.4.1       withr_2.1.2      DBI_1.1.0        dbplyr_1.4.2    
## [17] modelr_0.1.5     readxl_1.3.1     lifecycle_0.2.0  munsell_0.5.0   
## [21] blogdown_0.17    gtable_0.3.0     cellranger_1.1.0 rvest_0.3.5     
## [25] evaluate_0.14    labeling_0.3     knitr_1.27       fansi_0.4.1     
## [29] broom_0.5.3      Rcpp_1.0.4.6     scales_1.1.0     backports_1.1.5 
## [33] jsonlite_1.6.1   farver_2.0.3     fs_1.4.1         hms_0.5.3       
## [37] digest_0.6.25    stringi_1.4.6    bookdown_0.17    grid_3.6.2      
## [41] cli_2.0.2        tools_3.6.2      magrittr_1.5     crayon_1.3.4    
## [45] pkgconfig_2.0.3  ellipsis_0.3.1   xml2_1.2.2       reprex_0.3.0    
## [49] lubridate_1.7.8  assertthat_0.2.1 rmarkdown_2.0    httr_1.4.1      
## [53] rstudioapi_0.11  R6_2.4.1         nlme_3.1-143     compiler_3.6.2

To leave a comment for the author, please follow the link and comment on their blog: R on Just be-cause.

R-bloggers.com offers daily e-mail updates about R news and tutorials about learning R and many other topics. Click here if you're looking to post or find an R/data-science job.
Want to share your content on R-bloggers? click here if you have a blog, or here if you don't.