**R Programming – DataScience+**, and kindly contributed to R-bloggers)

Results so far obtained allow us to predict the RainTomorrow Yes/No variable. In the first part, we highlighted that such factor variable can be put in relationship with the Rainfall quantitative one by:

all.equal(weather_data$Rainfall > 1, weather_data$RainToday == "Yes")

As a consequence, we are able so far to predict if tomorrow rainfall shall be above 1mm or not. Some more questions to be answered:

- In case of “at least moderate” Rainfall (arbitrarily defined as Rainfall > 15mm), how do our models perform?

In case of “at least moderate” rainfall, we would like to be as much reliable as possible in predicting {RainTomorrow = “Yes”}. Since RainTomorrow = “Yes” is perceived as the prediction of a potential threat of damages due to the rainfall, we have to alert Canberra’s citizens properly. That translates in having a very good specificity, as explained in the presecution of the analysis.

- Can we build additional models in order to predict further variables such as tomorrow’s Rainfall, Humidity3pm, WindGustSpeed, Sunshine, MinTemp and MaxTemp variables?

That is motivated by the fact that weather forecast comprises more than one prediction. For an example of the most typical ones, see:

## Moderate Rainfall Scenario

Since Rainfall was one of the variable we drop off from our original dataset, we have to consider it back and identify the records which are associated to moderate rainfall. The following note applies.

### Note on predictors availability

In the prosecution of the analysis, we will not make the assumption to have to implement separate 9AM, 3PM and late evening predictions as done in part #2. For simplicity and brevity, we assume to have to arrange this new goals in the late evening where all predictors are available. Similarly as done before, we will not take into account the following variables:

Date, Location, RISK_MM, RainToday, Rainfall, WindDir9am, WindDir3pm

as Date and Location cannot be used as predictors; RISK_MM, RainToday, Rainfall are not used to make our task a little bit more difficult; we demonstrated in the first tutorial of this series that WinDir9am and WinDir3pm are not interesting predictors and they have associated a considerable number of NA values.

Having said that, we then start the moderate rainfall scenario analysis. At the same time, we prepare the dataset for the rest of the analysis.

weather_data6 <- subset(weather_data, select = -c(Date, Location, RISK_MM, RainToday, WindDir9am, WindDir3pm)) weather_data6$RainfallTomorrow <- c(weather_data6$Rainfall[2:nrow(weather_data6)], NA) weather_data6$Humidity3pmTomorrow <- c(weather_data6$Humidity3pm[2:nrow(weather_data6)], NA) weather_data6$WindGustSpeedTomorrow <- c(weather_data6$WindGustSpeed[2:nrow(weather_data6)], NA) weather_data6$SunshineTomorrow <- c(weather_data6$Sunshine[2:nrow(weather_data6)], NA) weather_data6$MinTempTomorrow <- c(weather_data6$MinTemp[2:nrow(weather_data6)], NA) weather_data6$MaxTempTomorrow <- c(weather_data6$MaxTemp[2:nrow(weather_data6)], NA) weather_data7 = weather_data6[complete.cases(weather_data6),] head(weather_data7)MinTemp MaxTemp Rainfall Evaporation Sunshine WindGustDir WindGustSpeed WindSpeed9am WindSpeed3pm 1 8.0 24.3 0.0 3.4 6.3 NW 30 6 20 2 14.0 26.9 3.6 4.4 9.7 ENE 39 4 17 3 13.7 23.4 3.6 5.8 3.3 NW 85 6 6 4 13.3 15.5 39.8 7.2 9.1 NW 54 30 24 5 7.6 16.1 2.8 5.6 10.6 SSE 50 20 28 6 6.2 16.9 0.0 5.8 8.2 SE 44 20 24 Humidity9am Humidity3pm Pressure9am Pressure3pm Cloud9am Cloud3pm Temp9am Temp3pm RainTomorrow 1 68 29 1019.7 1015.0 7 7 14.4 23.6 Yes 2 80 36 1012.4 1008.4 5 3 17.5 25.7 Yes 3 82 69 1009.5 1007.2 8 7 15.4 20.2 Yes 4 62 56 1005.5 1007.0 2 7 13.5 14.1 Yes 5 68 49 1018.3 1018.5 7 7 11.1 15.4 No 6 70 57 1023.8 1021.7 7 5 10.9 14.8 No RainfallTomorrow Humidity3pmTomorrow WindGustSpeedTomorrow SunshineTomorrow MinTempTomorrow 1 3.6 36 39 9.7 14.0 2 3.6 69 85 3.3 13.7 3 39.8 56 54 9.1 13.3 4 2.8 49 50 10.6 7.6 5 0.0 57 44 8.2 6.2 6 0.2 47 43 8.4 6.1 MaxTempTomorrow 1 26.9 2 23.4 3 15.5 4 16.1 5 16.9 6 18.2

hr_idx = which(weather_data7$RainfallTomorrow > 15)

It is important to understand what is the segmentation of moderate rainfall records in terms of training and testing set, as herein shown.

(train_hr <- hr_idx[hr_idx %in% train_rec])[1] 9 22 30 52 79 143 311

(test_hr <- hr_idx[!(hr_idx %in% train_rec)])[1] 3 99 239 251

We see that some of the “at least moderate” Rainfall records belong to the testing dataset, hence we can use it in order to have a measure based on unseen data by our model. We test the evening models with a test-set comprising such moderate rainfall records.

rain_test <- weather_data7[test_hr,] rain_testMinTemp MaxTemp Rainfall Evaporation Sunshine WindGustDir WindGustSpeed WindSpeed9am WindSpeed3pm 3 13.7 23.4 3.6 5.8 3.3 NW 85 6 6 99 14.5 24.2 0.0 6.8 5.9 SSW 61 11 20 250 3.0 11.1 0.8 1.4 0.2 W 35 0 13 263 -1.1 11.0 0.2 1.8 0.0 WNW 41 0 6 Humidity9am Humidity3pm Pressure9am Pressure3pm Cloud9am Cloud3pm Temp9am Temp3pm RainTomorrow 3 82 69 1009.5 1007.2 8 7 15.4 20.2 Yes 99 76 76 999.4 998.9 7 7 17.9 20.3 Yes 250 99 96 1024.4 1021.1 7 8 6.3 8.6 Yes 263 92 87 1014.4 1009.0 7 8 2.4 8.7 Yes RainfallTomorrow Humidity3pmTomorrow WindGustSpeedTomorrow SunshineTomorrow MinTempTomorrow 3 39.8 56 54 9.1 13.3 99 16.2 58 41 5.6 12.4 250 16.8 72 35 6.5 2.9 263 19.2 56 54 7.5 2.3 MaxTempTomorrow 3 15.5 99 19.9 250 9.5 263 11.6

Let us see how the first weather forecast evening model performs.

opt_cutoff <- 0.42 pred_test <- predict(mod_ev_c2_fit, rain_test, type="prob") prediction <- ifelse(pred_test$Yes >= opt_cutoff, "Yes", "No") data.frame(prediction = prediction, RainfallTomorrow = rain_test$RainfallTomorrow)prediction RainfallTomorrow 1 Yes 39.8 2 No 16.2 3 Yes 16.8 4 Yes 19.2

confusionMatrix(prediction, rain_test$RainTomorrow)Confusion Matrix and Statistics Reference Prediction No Yes No 0 1 Yes 0 3 Accuracy : 0.75 95% CI : (0.1941, 0.9937) No Information Rate : 1 P-Value [Acc > NIR] : 1 Kappa : 0 Mcnemar's Test P-Value : 1 Sensitivity : NA Specificity : 0.75 Pos Pred Value : NA Neg Pred Value : NA Prevalence : 0.00 Detection Rate : 0.00 Detection Prevalence : 0.25 Balanced Accuracy : NA 'Positive' Class : No

Then, the second evening weather forecast model.

opt_cutoff <- 0.56 pred_test <- predict(mod_ev_c3_fit, rain_test, type="prob") prediction <- ifelse(pred_test$Yes >= opt_cutoff, "Yes", "No") data.frame(prediction = prediction, RainfallTomorrow = rain_test$RainfallTomorrow)prediction RainfallTomorrow 1 Yes 39.8 2 Yes 16.2 3 No 16.8 4 Yes 19.2

confusionMatrix(prediction, rain_test$RainTomorrow)Confusion Matrix and Statistics Reference Prediction No Yes No 0 1 Yes 0 3 Accuracy : 0.75 95% CI : (0.1941, 0.9937) No Information Rate : 1 P-Value [Acc > NIR] : 1 Kappa : 0 Mcnemar's Test P-Value : 1 Sensitivity : NA Specificity : 0.75 Pos Pred Value : NA Neg Pred Value : NA Prevalence : 0.00 Detection Rate : 0.00 Detection Prevalence : 0.25 Balanced Accuracy : NA 'Positive' Class : No

For both evening forecast models, one of the testing set predictions is wrong. If we like to improve it, we have to step back to the tuning procedure and determine a decision threshold value more suitable to capture such scenarios. From the tables that we show in the previous part, we can try to lower the cutoff value to increase specificity, however likely implying to reduce accuracy.

## Chance of Rain

In the previous part of this series, when discussing with the tuning of the decision threshold, we dealt with probabilities associated to the predicted RainTomorrow variable. The chances of having RainTomorrow == “Yes” are equivalent to the chance of rain. Hence the following utiligy function can be depicted at the purpose

chance_of_rain <- function(model, data_record){ chance_frac <- predict(mod_ev_c3_fit, data_record, type="prob")[, "Yes"] paste(round(chance_frac*100), "%", sep="") }

We try it out passing ten records of the testing dataset.

chance_of_rain(mod_ev_c3_fit, testing[1:10,])[1] "79%" "3%" "4%" "3%" "1%" "7%" "69%" "61%" "75%" "78%"

To build all the following models, we are going to use all the data available in order to capture the variability of an entire year. For brevity, we do not make comparison among models for same predicted variable and we do not show regression models diagnostic plots.

## Tomorrow’s Rainfall Prediction

If the logistic regression model predicts RainTomorrow = “Yes”, we would like to take advantage of a linear regression model capable to predict the Rainfall value for tomorrow. In other words, we are just interested in records whose Rainfall outcome is greater than 1 mm.

weather_data8 = weather_data7[weather_data7$RainfallTomorrow > 1,] rf_fit <- lm(RainfallTomorrow ~ MaxTemp + Sunshine + WindGustSpeed - 1, data = weather_data8) summary(rf_fit)Call: lm(formula = RainfallTomorrow ~ MaxTemp + Sunshine + WindGustSpeed - 1, data = weather_data8) Residuals: Min 1Q Median 3Q Max -10.363 -4.029 -1.391 3.696 23.627 Coefficients: Estimate Std. Error t value Pr(>|t|) MaxTemp 0.3249 0.1017 3.196 0.002225 ** Sunshine -1.2515 0.2764 -4.528 2.88e-05 *** WindGustSpeed 0.1494 0.0398 3.755 0.000394 *** --- Signif. codes: 0 ‘***’ 0.001 ‘**’ 0.01 ‘*’ 0.05 ‘.’ 0.1 ‘ ’ 1 Residual standard error: 6.395 on 60 degrees of freedom Multiple R-squared: 0.6511, Adjusted R-squared: 0.6336 F-statistic: 37.32 on 3 and 60 DF, p-value: 9.764e-14

All predictors are reported as significant.

lm_pred <- predict(rf_fit, weather_data8) plot(x = seq_along(weather_data8$RainfallTomorrow), y = weather_data8$RainfallTomorrow, type='p', xlab = "observations", ylab = "RainfallTomorrow") legend("topright", c("actual", "predicted"), fill = c("black", "red")) points(x = seq_along(weather_data8$RainfallTomorrow), y = lm_pred, col='red')

The way we intend to use this model together with the logistic regression model predicting RainTomorrow factor variable is the following.

+----------------------+ +--------------------+ | logistic regression | | linear regression | | model +--> {RainTomorrow = Yes} -->--+ model for |----> {RainfallTomorrow prediction} | | | RainFallTomorrow | +--------+-------------+ +--------------------+ | | +---------------- {RainTomorrow = No} -->-- {Rainfall < 1 mm}

## Tomorrow’s Humidity 3pm Prediction

h3pm_fit <- lm(Humidity3pmTomorrow ~ Humidity3pm + Sunshine, data = weather_data7) summary(h3pm_fit)Call: lm(formula = Humidity3pmTomorrow ~ Humidity3pm + Sunshine, data = weather_data7) Residuals: Min 1Q Median 3Q Max -30.189 -9.117 -2.417 7.367 45.725 Coefficients: Estimate Std. Error t value Pr(>|t|) (Intercept) 34.18668 5.45346 6.269 1.09e-09 *** Humidity3pm 0.37697 0.06973 5.406 1.21e-07 *** Sunshine -0.85027 0.33476 -2.540 0.0115 * --- Signif. codes: 0 ‘***’ 0.001 ‘**’ 0.01 ‘*’ 0.05 ‘.’ 0.1 ‘ ’ 1 Residual standard error: 14.26 on 344 degrees of freedom Multiple R-squared: 0.2803, Adjusted R-squared: 0.2761 F-statistic: 66.99 on 2 and 344 DF, p-value: < 2.2e-16

All predictors are reported as significant.

lm_pred <- predict(h3pm_fit, weather_data7) plot(x = seq_along(weather_data7$Humidity3pmTomorrow), y = weather_data7$Humidity3pmTomorrow, type='p', xlab = "observations", ylab = "Humidity3pmTomorrow") legend("topright", c("actual", "predicted"), fill = c("black", "red")) points(x = seq_along(weather_data7$Humidity3pmTomorrow), y = lm_pred, col='red')

## Tomorrow’s WindGustSpeed Prediction

wgs_fit <- lm(WindGustSpeedTomorrow ~ WindGustSpeed + Pressure9am + Pressure3pm, data = weather_data7) summary(wgs_fit)Call: lm(formula = WindGustSpeedTomorrow ~ Pressure9am + Pressure3pm + WindGustSpeed, data = weather_data7) Residuals: Min 1Q Median 3Q Max -31.252 -7.603 -1.069 6.155 49.984 Coefficients: Estimate Std. Error t value Pr(>|t|) (Intercept) 620.53939 114.83812 5.404 1.22e-07 *** Pressure9am 2.17983 0.36279 6.009 4.78e-09 *** Pressure3pm -2.76596 0.37222 -7.431 8.66e-13 *** WindGustSpeed 0.23365 0.05574 4.192 3.52e-05 *** --- Signif. codes: 0 ‘***’ 0.001 ‘**’ 0.01 ‘*’ 0.05 ‘.’ 0.1 ‘ ’ 1 Residual standard error: 11.29 on 343 degrees of freedom Multiple R-squared: 0.2628, Adjusted R-squared: 0.2563 F-statistic: 40.75 on 3 and 343 DF, p-value: < 2.2e-16

All predictors are reported as significant.

lm_pred <- predict(wgs_fit, weather_data7) plot(x = seq_along(weather_data7$WindGustSpeedTomorrow), y = weather_data7$WindGustSpeedTomorrow, type='p', xlab = "observations", ylab = "WindGustSpeedTomorrow") legend("topright", c("actual", "predicted"), fill = c("black", "red")) points(x = seq_along(weather_data7$WindGustSpeedTomorrow), y = lm_pred, col='red')

## Tomorrow’s Sunshine Prediction

sun_fit <- lm(SunshineTomorrow ~ Sunshine*Humidity3pm + Cloud3pm + Evaporation + I(Evaporation^2) + WindGustSpeed - 1, data = weather_data7) summary(sun_fit)Call: lm(formula = SunshineTomorrow ~ Sunshine * Humidity3pm + Cloud3pm + Evaporation + I(Evaporation^2) + WindGustSpeed - 1, data = weather_data7) Residuals: Min 1Q Median 3Q Max -9.9701 -1.8230 0.6534 2.1907 7.0478 Coefficients: Estimate Std. Error t value Pr(>|t|) Sunshine 0.607984 0.098351 6.182 1.82e-09 *** Humidity3pm 0.062289 0.012307 5.061 6.84e-07 *** Cloud3pm -0.178190 0.082520 -2.159 0.031522 * Evaporation 0.738127 0.245356 3.008 0.002822 ** I(Evaporation^2) -0.050735 0.020510 -2.474 0.013862 * WindGustSpeed 0.036675 0.013624 2.692 0.007453 ** Sunshine:Humidity3pm -0.007704 0.002260 -3.409 0.000729 *** --- Signif. codes: 0 ‘***’ 0.001 ‘**’ 0.01 ‘*’ 0.05 ‘.’ 0.1 ‘ ’ 1 Residual standard error: 3.134 on 340 degrees of freedom Multiple R-squared: 0.8718, Adjusted R-squared: 0.8692 F-statistic: 330.3 on 7 and 340 DF, p-value: < 2.2e-16

All predictors are reported as significant. Very good adjusted R-squared.

lm_pred <- predict(sun_fit, weather_data7) plot(x = seq_along(weather_data7$SunshineTomorrow), y = weather_data7$SunshineTomorrow, type='p', xlab = "observations", ylab = "SunshineTomorrow") legend("topright", c("actual", "predicted"), fill = c("black", "red")) points(x = seq_along(weather_data7$SunshineTomorrow), y = lm_pred, col='red')

Above plot makes more evident that this model captures only a subset of the original Sunshine variance.

To give a more intuitive interpretation of the Sunshine information, it is suggestable to report a factor variable having levels:

{"Cloudy", "Mostly Cloudy", "Partly Cloudy", "Mostly Sunny", "Sunny"}

In doing that, we have furthermore to take into account tomorrow’s Cloud9am and Cloud3pm. For those quantitative variables, corresponding predictions are needed, and, at the purpose, the following linear regression models based on the Sunshine predictor can be depicted.

cloud9am_fit <- lm(Cloud9am ~ Sunshine, data = weather_data7) summary(cloud9am_fit)Call: lm(formula = Cloud9am ~ Sunshine, data = weather_data7) Residuals: Min 1Q Median 3Q Max -5.2521 -1.7635 -0.4572 1.6920 5.9127 Coefficients: Estimate Std. Error t value Pr(>|t|) (Intercept) 8.51527 0.28585 29.79 <2e-16 *** Sunshine -0.58031 0.03298 -17.59 <2e-16 *** --- Signif. codes: 0 ‘***’ 0.001 ‘**’ 0.01 ‘*’ 0.05 ‘.’ 0.1 ‘ ’ 1 Residual standard error: 2.163 on 345 degrees of freedom Multiple R-squared: 0.4729, Adjusted R-squared: 0.4714 F-statistic: 309.6 on 1 and 345 DF, p-value: < 2.2e-16

All predictors are reported as significant.

lm_pred <- round(predict(cloud9am_fit, weather_data7)) lm_pred[lm_pred == 9] = 8 plot(x = weather_data7$Sunshine, y = weather_data7$Cloud9am, type='p', xlab = "Sunshine", ylab = "Cloud9am") legend("topright", c("actual", "predicted"), fill = c("black", "red")) points(x = weather_data7$Sunshine, y = lm_pred, col='red')

cloud3pm_fit <- lm(Cloud3pm ~ Sunshine, data = weather_data7) summary(cloud3pm_fit)Call: lm(formula = Cloud3pm ~ Sunshine, data = weather_data7) Residuals: Min 1Q Median 3Q Max -4.1895 -1.6230 -0.0543 1.4829 5.2883 Coefficients: Estimate Std. Error t value Pr(>|t|) (Intercept) 8.01199 0.26382 30.37 <2e-16 *** Sunshine -0.50402 0.03044 -16.56 <2e-16 *** --- Signif. codes: 0 ‘***’ 0.001 ‘**’ 0.01 ‘*’ 0.05 ‘.’ 0.1 ‘ ’ 1 Residual standard error: 1.996 on 345 degrees of freedom Multiple R-squared: 0.4428, Adjusted R-squared: 0.4412 F-statistic: 274.2 on 1 and 345 DF, p-value: < 2.2e-16

All predictors are reported as significant.

lm_pred <- round(predict(cloud3pm_fit, weather_data7)) lm_pred[lm_pred == 9] = 8 plot(x = weather_data7$Sunshine, y = weather_data7$Cloud3pm, type='p', xlab = "Sunshine", ylab = "Cloud3pm") legend("topright", c("actual", "predicted"), fill = c("black", "red")) points(x = weather_data7$Sunshine, y = lm_pred, col='red')

Once predicted the SunshineTomorrow value, we can use it as predictor input in Cloud9am/Cloud3pm linear regression models to determine both tomorrow’s Cloud9am and Cloud3pm predictions. We have preferred such approach in place of building a model based on one of the following formulas:

Cloud9amTomorrow ~ Cloud9am Cloud9amTomorrow ~ Cloud9am + Sunshine Cloud3pmTomorrow ~ Cloud3pm

because they provide with a very low adjusted R-squared (approximately in the interval [0.07, 0.08]).

Based on the Cloud9am and Cloud3pm predictions, the computation of a new factor variable named as CloudConditions and having levels {“Cloudy”, “Mostly Cloudy”, “Partly Cloudy”, “Mostly Sunny”, “Sunny”} will be shown. As we observed before our Sunshine prediction captures only a a subset of the variance of the modeled variable, and, as a consequence, our cloud conditions prediction is expected to rarely (possibly never) report “Cloudy” and “Sunny”.

## Tomorrow’s MinTemp Prediction

minTemp_fit <- lm(MinTempTomorrow ~ MinTemp + Humidity3pm , data = weather_data7) summary(minTemp_fit)Call: lm(formula = MinTempTomorrow ~ MinTemp + Humidity3pm, data = weather_data7) Residuals: Min 1Q Median 3Q Max -10.4820 -1.7546 0.3573 1.9119 10.0953 Coefficients: Estimate Std. Error t value Pr(>|t|) (Intercept) 2.696230 0.520244 5.183 3.74e-07 *** MinTemp 0.844813 0.027823 30.364 < 2e-16 *** Humidity3pm -0.034404 0.009893 -3.478 0.000571 *** --- Signif. codes: 0 ‘***’ 0.001 ‘**’ 0.01 ‘*’ 0.05 ‘.’ 0.1 ‘ ’ 1 Residual standard error: 3.112 on 344 degrees of freedom Multiple R-squared: 0.7327, Adjusted R-squared: 0.7311 F-statistic: 471.4 on 2 and 344 DF, p-value: < 2.2e-16

All predictors are reported as significant.

lm_pred <- predict(minTemp_fit, weather_data7) plot(x = weather_data7$Sunshine, y = weather_data7$MinTemp, type='p', xlab = "Sunshine", ylab = "MinTemp") legend("topright", c("actual", "fitted"), fill = c("black", "red")) points(x = weather_data7$Sunshine, y = lm_pred, col='red')

## Tomorrow’s MaxTemp Prediction

maxTemp_fit <- lm(MaxTempTomorrow ~ MaxTemp + Evaporation, data = weather_data7) summary(maxTemp_fit)Call: lm(formula = MaxTempTomorrow ~ MaxTemp + Evaporation, data = weather_data7) Residuals: Min 1Q Median 3Q Max -13.217 -1.609 0.137 2.025 9.708 Coefficients: Estimate Std. Error t value Pr(>|t|) (Intercept) 2.69811 0.56818 4.749 3.01e-06 *** MaxTemp 0.82820 0.03545 23.363 < 2e-16 *** Evaporation 0.20253 0.08917 2.271 0.0237 * --- Signif. codes: 0 ‘***’ 0.001 ‘**’ 0.01 ‘*’ 0.05 ‘.’ 0.1 ‘ ’ 1 Residual standard error: 3.231 on 344 degrees of freedom Multiple R-squared: 0.7731, Adjusted R-squared: 0.7718 F-statistic: 586 on 2 and 344 DF, p-value: < 2.2e-16

All predictors are reported as significant.

lm_pred <- predict(maxTemp_fit, weather_data7) plot(x = weather_data7$Sunshine, y = weather_data7$MaxTemp, type='p', xlab = "Sunshine", ylab = "MaxTemp") legend("topright", c("actual", "fitted"), fill = c("black", "red")) points(x = weather_data7$Sunshine, y = lm_pred, col='red')

## CloudConditions computation

Based on second reference given at the end, we have the following mapping between a descriptive cloud conditions string and the cloud coverage in ”oktas,” which are a unit of eights.

Cloudy: 8/8 opaque clouds Mostly Cloudy: 6/8 - 7/8 opaque clouds Partly Cloudy: 3/8 - 5/8 opaque clouds Mostly Sunny: 1/8 - 2/8 opaque clouds Sunny: 0/8 opaque clouds

We can figure out the following utility function to help.

computeCloudConditions = function(cloud_9am, cloud_3pm) { cloud_avg = min(round((cloud_9am + cloud_3pm)/2), 8) cc_str = NULL if (cloud_avg == 8) { cc_str = "Cloudy" } else if (cloud_avg >= 6) { cc_str = "Mostly Cloudy" } else if (cloud_avg >= 3) { cc_str = "Partly Cloudy" } else if (cloud_avg >= 1) { cc_str = "Mostly Sunny" } else if (cloud_avg < 1) { cc_str = "Sunny" } cc_str }

## Weather Forecast Report

Starting from a basic example of weather dataset, we were able to build several regression models. The first one, based on logistic regression, is capable of predict the RainTomorrow factor variable. The linear regression models are to predict the Rainfall, Humidity3pm, WindGustSpeed, MinTemp, MaxTemp, CloudConditions weather metrics. The overall picture we got is the following.

+----------------+ | | | +------> RainTomorrow | | | Weather +------> Rainfall | | {Today's weather data} ---->----+ Forecast +------> Humidity3pm | | | Models +------> WindGustSpeed +-----------------------+ | | | linear regression | | +------> Sunshine ------>-------+ models +-->--{Cloud9am, Cloud3pm}--+ | | | Cloud9am and Cloud3pm | | | +------> MinTemp +-----------------------+ | | | | | +------> MaxTemp | | | | +----------------+ +-----------------------+ | | computing new | | { Cloudy, Mostly Cloudy, Partly Cloudy, Mostly Sunny, Sunny} <-----+ factor variable +-------------<-------------+ | CloudConditions | +-----------------------+

As said before, if RainTomorrow == “Yes” Rainfall is explicitely given, otherwise un upper bound Rainfall < 1 mm is. Chance of rain is computed only if RainTomorrow prediction is “Yes”. The Humidity3pm prediction is taken as humidity prediction for the whole day, in general.

weather_report <- function(today_record, rain_tomorrow_model, cutoff) { # RainTomorrow prediction rainTomorrow_prob <- predict(rain_tomorrow_model, today_record, type="prob") rainTomorrow_pred = ifelse(rainTomorrow_prob$Yes >= cutoff, "Yes", "No") # Rainfall prediction iff RainTomorrow prediction is Yes; chance of rain probability rainfall_pred <- NA chance_of_rain <- NA if (rainTomorrow_pred == "Yes") { rainfall_pred <- round(predict(rf_fit, today_record), 1) chance_of_rain <- round(rainTomorrow_prob$Yes*100) } # WindGustSpeed prediction wgs_pred <- round(predict(wgs_fit, today_record), 1) # Humidity3pm prediction h3pm_pred <- round(predict(h3pm_fit, today_record), 1) # sunshine prediction is used to fit Cloud9am and Cloud3pm sun_pred <- predict(sun_fit, today_record) cloud9am_pred <- min(round(predict(cloud9am_fit, data.frame(Sunshine=sun_pred))), 8) cloud3pm_pred <- min(round(predict(cloud3pm_fit, data.frame(Sunshine=sun_pred))), 8) # a descriptive cloud conditions string is computed CloudConditions_pred <- computeCloudConditions(cloud9am_pred, cloud3pm_pred) # MinTemp prediction minTemp_pred <- round(predict(minTemp_fit, today_record), 1) # MaxTemp prediction maxTemp_pred <- round(predict(maxTemp_fit, today_record), 1) # converting all numeric predictions to strings if (is.na(rainfall_pred)) { rainfall_pred_str <- "< 1 mm" } else { rainfall_pred_str <- paste(rainfall_pred, "mm", sep = " ") } if (is.na(chance_of_rain)) { chance_of_rain_str <- "" } else { chance_of_rain_str <- paste(chance_of_rain, "%", sep="") } wgs_pred_str <- paste(wgs_pred, "Km/h", sep= " ") h3pm_pred_str <- paste(h3pm_pred, "%", sep = "") minTemp_pred_str <- paste(minTemp_pred, "°C", sep= "") maxTemp_pred_str <- paste(maxTemp_pred, "°C", sep= "") report <- data.frame(Rainfall = rainfall_pred_str, ChanceOfRain = chance_of_rain_str, WindGustSpeed = wgs_pred_str, Humidity = h3pm_pred_str, CloudConditions = CloudConditions_pred, MinTemp = minTemp_pred_str, MaxTemp = maxTemp_pred_str) report }

Sure there are confidence and prediction intervals associated to our predictions. However, since we intend to report our forecasts to Canberra’s citizens, our message should be put in simple words to reach everybody and not just statisticians.

Finally we can try our tomorrow weather forecast report out.

(tomorrow_report <- weather_report(weather_data[10,], mod_ev_c3_fit, 0.56))Rainfall ChanceOfRain WindGustSpeed Humidity CloudConditions MinTemp MaxTemp 1 < 1 mm 36.9 Km/h 39.7% Partly Cloudy 8.7°C 22.7°C

(tomorrow_report <- weather_report(weather_data[32,], mod_ev_c3_fit, 0.56))Rainfall ChanceOfRain WindGustSpeed Humidity CloudConditions MinTemp MaxTemp 1 < 1 mm 48 Km/h 41.3% Partly Cloudy 10.9°C 24.8°C

(tomorrow_report <- weather_report(weather_data[50,], mod_ev_c3_fit, 0.56))Rainfall ChanceOfRain WindGustSpeed Humidity CloudConditions MinTemp MaxTemp 1 8.3 mm 59% 36.9 Km/h 60.1% Partly Cloudy 10.8°C 22.2°C

(tomorrow_report <- weather_report(weather_data[100,], mod_ev_c3_fit, 0.56))Rainfall ChanceOfRain WindGustSpeed Humidity CloudConditions MinTemp MaxTemp 1 5.4 mm 71% 46.7 Km/h 51.3% Partly Cloudy 11.2°C 20.3°C

(tomorrow_report <- weather_report(weather_data[115,], mod_ev_c3_fit, 0.56))Rainfall ChanceOfRain WindGustSpeed Humidity CloudConditions MinTemp MaxTemp 1 < 1 mm 46.4 Km/h 35.7% Mostly Sunny 12.3°C 25.1°C

(tomorrow_report <- weather_report(weather_data[253,], mod_ev_c3_fit, 0.56))Rainfall ChanceOfRain WindGustSpeed Humidity CloudConditions MinTemp MaxTemp 1 9.4 mm 81% 52.4 Km/h 65.2% Partly Cloudy 1.3°C 10.3°C

(tomorrow_report <- weather_report(weather_data[311,], mod_ev_c3_fit, 0.56))Rainfall ChanceOfRain WindGustSpeed Humidity CloudConditions MinTemp MaxTemp 1 < 1 mm 40.7 Km/h 44.2% Mostly Cloudy 6.9°C 16.4°C

Please note that some records of the original weather dataset may show NA’s values and our regression models did not cover a predictor can be as such. To definitely evaluate the accuracy of our weather forecast report, we would need to check its unseen data predictions with the occurred tomorrow’s weather. Further, to improve the adjusted R-squared metric of our linear regression models is a potential area of investigation.

## Conclusions

Starting from a basic weather dataset, we went through an interesting datastory involving exploratory analysis and models building. We spot strengths and weaknesses of our prediction models. We also learned some insights of the meteorology terminology.

We hope you enjoyed this tutorial series on weather forecast. If you have any questions, please feel free to comment below.

**References**

Related Post

- Weather forecast with regression models – part 3
- Weather forecast with regression models – part 2
- Weather forecast with regression models – part 1
- Weighted Linear Support Vector Machine
- Logistic Regression Regularized with Optimization

**leave a comment**for the author, please follow the link and comment on their blog:

**R Programming – DataScience+**.

R-bloggers.com offers

**daily e-mail updates**about R news and tutorials on topics such as: Data science, Big Data, R jobs, visualization (ggplot2, Boxplots, maps, animation), programming (RStudio, Sweave, LaTeX, SQL, Eclipse, git, hadoop, Web Scraping) statistics (regression, PCA, time series, trading) and more...