**Giga thoughts ... » R**, and kindly contributed to R-bloggers]. (You can report issue about the content on this page here)

Want to share your content on R-bloggers? click here if you have a blog, or here if you don't.

*“Curiouser and curiouser!” cried Alice*

*“The time has come,” the walrus said, “to talk of many things: Of shoes and ships – and sealing wax – of cabbages and kings”*

*“Begin at the beginning,”the King said, very gravely,“and go on till you come to the end: then stop.”*

*“And what is the use of a book,” thought Alice, “without pictures or conversation?”*

` Excerpts from Alice in Wonderland by Lewis Carroll`

# Introduction

This post is a continuation of my previous post “Introducing cricketr! A R package to analyze the performances of cricketers.” In this post I take my package **cricketr** for a spin. For this analysis I focus on the Indian batting legends

– Sachin Tendulkar (Master Blaster)

– Rahul Dravid (The Will)

– Sourav Ganguly ( The Dada Prince)

– Sunil Gavaskar (Little Master)

This post is also hosted on RPubs – cricketr-1

```
library(devtools)
install_github("tvganesh/cricketr")
library(cricketr)
```

## Box Histogram Plot

This plot shows a combined boxplot of the Runs ranges and a histogram of the Runs Frequency The plot below indicate the Tendulkar’s average is the highest. He is followed by Dravid, Gavaskar and then Ganguly

```
batsmanPerfBoxHist("./tendulkar.csv","Sachin Tendulkar")
```

```
batsmanPerfBoxHist("./dravid.csv","Rahul Dravid")
```

```
batsmanPerfBoxHist("./ganguly.csv","Sourav Ganguly")
```

`batsmanPerfBoxHist("./gavaskar.csv","Sunil Gavaskar")`

## Relative Mean Strike Rate

In this first plot I plot the Mean Strike Rate of the batsmen. Tendulkar leads in the Mean Strike Rate for each runs in the range 100- 180. Ganguly has a very good Mean Strike Rate for runs range 40 -80

```
frames <- list("./tendulkar.csv","./dravid.csv","ganguly.csv","gavaskar.csv")
names <- list("Tendulkar","Dravid","Ganguly","Gavaskar")
relativeBatsmanSR(frames,names)
```

# Relative Runs Frequency Percentage

The plot below show the percentage contribution in each 10 runs bucket over the entire career.The percentage Runs Frequency is fairly close but Gavaskar seems to lead most of the way

```
frames <- list("./tendulkar.csv","./dravid.csv","ganguly.csv","gavaskar.csv")
names <- list("Tendulkar","Dravid","Ganguly","Gavaskar")
relativeRunsFreqPerf(frames,names)
```

# Moving Average of runs over career

The moving average for the 4 batsmen indicate the following – Tendulkar and Ganguly’s career has a downward trend and their retirement didn’t come too soon – Dravid and Gavaskar’s career definitely shows an upswing. They probably had a year or two left.

```
par(mfrow=c(2,2))
par(mar=c(4,4,2,2))
batsmanMovingAverage("./tendulkar.csv","Tendulkar")
batsmanMovingAverage("./dravid.csv","Dravid")
batsmanMovingAverage("./ganguly.csv","Ganguly")
batsmanMovingAverage("./gavaskar.csv","Gavaskar")
```

`dev.off()`

```
## null device
## 1
```

# Runs forecast

The forecast for the batsman is shown below. The plots indicate that only Tendulkar seemed to maintain a consistency over the period while the rest seem to score less than their forecasted runs in the last 10% of the career

```
par(mfrow=c(2,2))
par(mar=c(4,4,2,2))
batsmanPerfForecast("./tendulkar.csv","Sachin Tendulkar")
batsmanPerfForecast("./dravid.csv","Rahul Dravid")
batsmanPerfForecast("./ganguly.csv","Sourav Ganguly")
batsmanPerfForecast("./gavaskar.csv","Sunil Gavaskar")
```

`dev.off()`

```
## null device
## 1
```

# Check for batsman in-form/out-of-form

The following snippet checks whether the batsman is in-inform or ouyt-of-form during the last 10% innings of the career. This is done by choosing the null hypothesis (h0) to indicate that the batsmen are in-form. Ha is the alternative hypothesis that they are not-in-form. The population is based on the 1st 90% of career runs. The last 10% is taken as the sample and a check is made on the lower tail to see if the sample mean is less than 95% confidence interval. If this difference is >0.05 then the batsman is considered out-of-form.

The computation show that Tendulkar was out-of-form while the other’s weren’t. While Dravid and Gavaskar’s moving average do show an upward trend the surprise is Ganguly. This could be that Ganguly was able to keep his average in the last 10% to with the 95$ confidence interval. It has to be noted that Ganguly’s average was much lower than Tendulkar

`checkBatsmanInForm("./tendulkar.csv","Tendulkar")`

```
## *******************************************************************************************
##
## Population size: 294 Mean of population: 50.48
## Sample size: 33 Mean of sample: 32.42 SD of sample: 29.8
##
## Null hypothesis H0 : Tendulkar 's sample average is within 95% confidence interval
## of population average
## Alternative hypothesis Ha : Tendulkar 's sample average is below the 95% confidence
## interval of population average
##
## [1] "Tendulkar 's Form Status: Out-of-Form because the p value: 0.000713 is less than alpha= 0.05"
## *******************************************************************************************
```

`checkBatsmanInForm("./dravid.csv","Dravid")`

```
## *******************************************************************************************
##
## Population size: 256 Mean of population: 46.98
## Sample size: 29 Mean of sample: 43.48 SD of sample: 40.89
##
## Null hypothesis H0 : Dravid 's sample average is within 95% confidence interval
## of population average
## Alternative hypothesis Ha : Dravid 's sample average is below the 95% confidence
## interval of population average
##
## [1] "Dravid 's Form Status: In-Form because the p value: 0.324138 is greater than alpha= 0.05"
## *******************************************************************************************
```

`checkBatsmanInForm("./ganguly.csv","Ganguly")`

```
## *******************************************************************************************
##
## Population size: 169 Mean of population: 38.94
## Sample size: 19 Mean of sample: 33.21 SD of sample: 32.97
##
## Null hypothesis H0 : Ganguly 's sample average is within 95% confidence interval
## of population average
## Alternative hypothesis Ha : Ganguly 's sample average is below the 95% confidence
## interval of population average
##
## [1] "Ganguly 's Form Status: In-Form because the p value: 0.229006 is greater than alpha= 0.05"
## *******************************************************************************************
```

`checkBatsmanInForm("./gavaskar.csv","Gavaskar")`

```
## *******************************************************************************************
##
## Population size: 125 Mean of population: 44.67
## Sample size: 14 Mean of sample: 57.86 SD of sample: 58.55
##
## Null hypothesis H0 : Gavaskar 's sample average is within 95% confidence interval
## of population average
## Alternative hypothesis Ha : Gavaskar 's sample average is below the 95% confidence
## interval of population average
##
## [1] "Gavaskar 's Form Status: In-Form because the p value: 0.793276 is greater than alpha= 0.05"
## *******************************************************************************************
```

`dev.off()`

```
## null device
## 1
```

# 3D plot of Runs vs Balls Faced and Minutes at Crease

The plot is a scatter plot of Runs vs Balls faced and Minutes at Crease. A prediction plane is fitted

```
par(mfrow=c(1,2))
par(mar=c(4,4,2,2))
battingPerf3d("./tendulkar.csv","Tendulkar")
battingPerf3d("./dravid.csv","Dravid")
```

```
par(mfrow=c(1,2))
par(mar=c(4,4,2,2))
battingPerf3d("./ganguly.csv","Ganguly")
battingPerf3d("./gavaskar.csv","Gavaskar")
```

`dev.off()`

```
## null device
## 1
```

# Predicting Runs given Balls Faced and Minutes at Crease

A multi-variate regression plane is fitted between Runs and Balls faced +Minutes at crease.

```
BF <- seq( 10, 400,length=15)
Mins <- seq(30,600,length=15)
newDF <- data.frame(BF,Mins)
tendulkar <- batsmanRunsPredict("./tendulkar.csv","Tendulkar",newdataframe=newDF)
dravid <- batsmanRunsPredict("./dravid.csv","Dravid",newdataframe=newDF)
ganguly <- batsmanRunsPredict("./ganguly.csv","Ganguly",newdataframe=newDF)
gavaskar <- batsmanRunsPredict("./gavaskar.csv","Gavaskar",newdataframe=newDF)
```

The fitted model is then used to predict the runs that the batsmen will score for a given Balls faced and Minutes at crease. It can be seen Tendulkar has a much higher Runs scored than all of the others.

Tendulkar is followed by Ganguly who we saw earlier had a very good strike rate. However it must be noted that Dravid and Gavaskar have a better average.

```
batsmen <-cbind(round(tendulkar$Runs),round(dravid$Runs),round(ganguly$Runs),round(gavaskar$Runs))
colnames(batsmen) <- c("Tendulkar","Dravid","Ganguly","Gavaskar")
newDF <- data.frame(round(newDF$BF),round(newDF$Mins))
colnames(newDF) <- c("BallsFaced","MinsAtCrease")
predictedRuns <- cbind(newDF,batsmen)
predictedRuns
```

```
## BallsFaced MinsAtCrease Tendulkar Dravid Ganguly Gavaskar
## 1 10 30 7 1 7 4
## 2 38 71 23 14 21 17
## 3 66 111 39 27 35 30
## 4 94 152 54 40 50 43
## 5 121 193 70 54 64 56
## 6 149 234 86 67 78 69
## 7 177 274 102 80 93 82
## 8 205 315 118 94 107 95
## 9 233 356 134 107 121 108
## 10 261 396 150 120 136 121
## 11 289 437 165 134 150 134
## 12 316 478 181 147 165 147
## 13 344 519 197 160 179 160
## 14 372 559 213 173 193 173
## 15 400 600 229 187 208 186
```

# Contribution to matches won and lost

```
par(mfrow=c(2,2))
par(mar=c(4,4,2,2))
batsmanContributionWonLost(35320,"Tendulkar")
batsmanContributionWonLost(28114,"Dravid")
batsmanContributionWonLost(28779,"Ganguly")
batsmanContributionWonLost(28794,"Gavaskar")
```

# Home and overseas performance

From the plot below Tendulkar and Dravid have a lot more matches both home and abroad and their performance has good both at home and overseas. Tendulkar has the best performance home and abroad and is consistent all across. Dravid is also cossistent at all venues. Gavaskar played fewer matches than Tendulkar & Dravid. The range of runs at home is higher than overseas, however the average is consistent both at home and abroad. Finally we have Ganguly.

```
par(mfrow=c(2,2))
par(mar=c(4,4,2,2))
batsmanPerfHomeAway(35320,"Tendulkar")
batsmanPerfHomeAway(28114,"Dravid")
batsmanPerfHomeAway(28779,"Ganguly")
batsmanPerfHomeAway(28794,"Gavaskar")
```

## Average runs at ground and against opposition

Tendulkar has above 50 runs average against Sri Lanka, Bangladesh, West Indies and Zimbabwe. The performance against Australia and England average very close to 50. Sydney, Port Elizabeth, Bloemfontein, Collombo are great huntings grounds for Tendulkar

```
par(mfrow=c(1,2))
par(mar=c(4,4,2,2))
batsmanAvgRunsGround("./tendulkar.csv","Tendulkar")
batsmanAvgRunsOpposition("./tendulkar.csv","Tendulkar")
```

`dev.off()`

```
## null device
## 1
```

Dravid plundered runs at Adelaide, Georgetown, Oval, Hamiltom etc. Dravid has above average against England, Bangaldesh, New Zealand, Pakistan, West Indies and Zimbabwe

```
par(mfrow=c(1,2))
par(mar=c(4,4,2,2))
batsmanAvgRunsGround("./dravid.csv","Dravid")
batsmanAvgRunsOpposition("./dravid.csv","Dravid")
```

`dev.off()`

```
## null device
## 1
```

Ganguly has good performance at the Oval, Rawalpindi, Johannesburg and Kandy. Ganguly averages 50 runs against England and Bangladesh.

```
par(mfrow=c(1,2))
par(mar=c(4,4,2,2))
batsmanAvgRunsGround("./ganguly.csv","Ganguly")
batsmanAvgRunsOpposition("./ganguly.csv","Ganguly")
```

`dev.off()`

```
## null device
## 1
```

The Oval, Sydney, Perth, Melbourne, Brisbane, Manchester are happy hunting grounds for Gavaskar. Gavaskar averages around 50 runs Australia, Pakistan, Sri Lanka, West Indies.

```
par(mfrow=c(1,2))
par(mar=c(4,4,2,2))
batsmanAvgRunsGround("./gavaskar.csv","Gavaskar")
batsmanAvgRunsOpposition("./gavaskar.csv","Gavaskar")
```

`dev.off()`

```
## null device
## 1
```

# Key findings

Here are some key conclusions

- Tendulkar has the highest average among the 4. He is followed by Dravid, Gavaskar and Ganguly.
- Tendulkar’s predicted performance for a given number of Balls Faced and Minutes at Crease is superior to the rest
- Dravid averages above 50 against 6 countries
- West Indies and Australia are Gavaskar’s favorite batting grounds
- Ganguly has a very good Mean Strike Rate for the range 40-80 and Tendulkar from 100-180
- In home and overseas performance, Tendulkar is the best. Dravid and Gavaskar also have good performance overseas.
- Dravid and Gavaskar probably retired a year or two earlier while Tendulkar and Ganguly’s time was clearly up

# Final thoughts

Tendulkar is clearly the greatest batsman India has produced as he leads in almost all aspects of batting – number of centuries, strike rate, predicted runs and home and overseas performance. Dravid follows Tendulkar with 48 centuries, consistent performance home and overseas and a career that was still green. Gavaskar has fewer matches than rest but his performance overseas is very good in those helmetless times. Finally we have Ganguly.

Dravid and Gavaskar had a few more years of great batting while Tendulkar and Ganguly’s career was on a decline.

**Note:**It is really not fair to include Gavaskar in the analysis as he played in a different era when helmets were not used, even against the fiery pace of Thomson, Lillee, Roberts, Holding etc. In addition Gavaskar did not play against some of the newer countries like Bangladesh and Zimbabwe where he could have amassed runs. Yet I wanted to include him and his performance is clearly excellent

Also see my other posts in R

- A peek into literacy in India: Statistical Learning with R
- A crime map of India in R – Crimes against women
- Analyzing cricket’s batting legends – Through the mirage with R
- Masters of Spin: Unraveling the web with R
- Mirror, mirror . the best batsman of them all?

You may also like

- A crime map of India in R: Crimes against women
- What’s up Watson? Using IBM Watson’s QAAPI with Bluemix, NodeExpress – Part 1
- Bend it like Bluemix, MongoDB with autoscaling – Part 2
- Informed choices through Machine Learning : Analyzing Kohli, Tendulkar and Dravid
- Thinking Web Scale (TWS-3): Map-Reduce – Bring compute to data
- Deblurring with OpenCV:Weiner filter reloaded

**leave a comment**for the author, please follow the link and comment on their blog:

**Giga thoughts ... » R**.

R-bloggers.com offers

**daily e-mail updates**about R news and tutorials about learning R and many other topics. Click here if you're looking to post or find an R/data-science job.

Want to share your content on R-bloggers? click here if you have a blog, or here if you don't.